Click and drag to rotate
UltraLight 20cm Landing Gear 3d printed The UltraLight 20cm Landing Gear gives your Phantom 1, 1.5 or 2's gimbal clearance from the ground and grass - yet weighs the same as the stock landing gear (shown with the Phantom 1.5 24mm Battery Door sold separately.)

DIGITAL PREVIEW
Not a Photo

The UltraLight 20cm Landing Gear gives your Phantom 1, 1.5 or 2's gimbal clearance from the ground and grass - yet weighs the same as the stock landing gear (shown with the Phantom 1.5 24mm Battery Door sold separately.)
UltraLight 20cm Landing Gear 3d printed The UltraLight 20cm Landing Gear gives your Phantom 1, 1.5 or 2's gimbal clearance from the ground and grass - yet weighs the same as the stock landing gear (shown with the Phantom 1.5 24mm Battery Door sold separately.)
UltraLight 20cm Landing Gear 3d printed The UltraLight 20cm Landing Gear gives your Phantom 1, 1.5 or 2's gimbal clearance from the ground and grass - yet weighs the same as the stock landing gear (shown with the Phantom 1.5 24mm Battery Door sold separately.)

DIGITAL PREVIEW
Not a Photo

UltraLight 20cm Landing Gear 3d printed The UltraLight 20cm Landing Gear shown integrated with the Fuselage Upgrade Kit.
UltraLight 20cm Landing Gear 3d printed The UltraLight 20cm Landing Gear shown integrated with the Fuselage Upgrade Kit.

DIGITAL PREVIEW
Not a Photo

UltraLight 20cm Landing Gear

Not For Sale

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
The UltraLight 20cm Landing Gear for the Fuselage Upgrade Kit for DJI Phantom comes ready-to-fly for your DJI Phantom. No modifications are required to your Phantom, and no additional parts are needed parts are needed with the exception of slightly longer M3 x 8mm screws. (Longer screws are required to mount the UltraLight 20cm Landing Gear through the struts of the Fuselage Upgrade Kit - sold separately.)

The UltraLight 20cm Landing Gear weighs only 10 grams more than the stock landing gear. Other solutions - even carbon fiber - weigh much more. Reduced weight increases flight times.

The UltraLight 20cm Landing Gear mounts on the stock landing gear mounts, and replaces the original landing gear, providing ample height for the Fuselage Upgrade Kit with a Tarot 2-Axis Gimbal* and GoPro Hero 3* camera mounted on it.

The UltraLight 20cm Landing Gear include an integrated compass mount to slide the Phantom's compass into.

Features
• The wides stance of the UltraLight 20cm Landing Gear provides a predictable platform for take-offs and landings for the DJI Phantom with the Fuselage Upgrade Kit installed
• The lightweight but strong and sturdy landing gear is designed specifically for use with the Fuselage Upgrade Kit
• Integrated plastic compass mount for the DJI Phantom

Benefits
• Specifically designed for use with the Fuselage Upgrade Kit
• The UltraLight 20cm Landing Gear is designed to stay outside of the view angle of the GoPro Hero3* camera when mounted to the Tarot 2-Axis Gimbal* except in the most aggressive flying maneuvers, yielding prop-free videos
• Lighter weight than other solutions
• No modification of the DJI Phantom
• Fast and easy installation
• Requires only a non-magnetic screwdriver to install

Special Instructions
• 8 qty 3M x 8mm screws are needed when installing with the Fuselage Upgrade Kit

Safety Warnings
• After installing the UltraLight 20cm Landing Gear, it is recommended to calibrate the compass of your DJI Phantom according to the instructions in the manual. See DJI's video. Particular care should be taken to insure that the compass is mounted perpendicular to the side of the Phantom and square with the ground. Slight adjustments may be necessary to position the compass in the compass mount of the landing gear.
• Parts are provided as-is. By installing the UltraLight 20cm Landing Gear, you agree that you remain fully responsibility for the airworthiness, safe operation and use of the DJI Phantom upgraded with UltraLight 20cm Landing Gear. Each pilot must verify the safety of their aircraft prior to take-off and maintain safe operations during flight. If at any time a concern develops about the airworthiness of a craft, it is the recommendation of Brian Self Design that the aircraft be grounded until all matters are fully resolved before flights resume.
• Brian Self Design cannot be responsible for any accidental damage that may occur to the Phantom or other components.

* Tarot 2-Axis Gimbal and GoPro Hero 3 camera not included

110913BSDLandingGearSW1.54 30 SET 14sw
Details
What's in the box:
UltraLight 20cm Landing Gear
The UltraLight 20cm Landing Gear gives your Phantom 1, 1.5 or 2's gimbal clearance from the ground and grass - yet weighs the same as the stock landing gear (shown with the Phantom 1.5 24mm Battery Door sold separately.)
Dimensions:
22.9 x 3.87 x 4.73 cm
Switch to inches
9.02 x 1.52 x 1.86 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.