Garmin RCT715 Saddle Rail Mount Adapter

For people who want to tuck their Garmin Varia RCT715 Radar/Camera/Taillight under the saddle and up high. If you have no palce to put it on a seat post this may be your solution. Requires two 4 mm wide zip ties (not included) to secure the mount to your saddle rails.

Here is a simple description of how to use this base module...
​

1. Remove the two torx screws from the back side of Garmin's supplied RCT715 mount using a T9 torx bit or torx driver. Save these screws as they will be reused. Do not lose them, they are small.
2. Separate the back from the front of the Garmin mount and set aside the rear portion, we no longer need this section of the mount.
3. Attach the front half of the Mount Adapter onto the back side of the remaining section of the RCT715 mount and secure with the two screws you set aside earlier.
4. Attach the newly completed mount onto your saddle with two M-3 (3 mm)  x 14 mm socket head socket screws.
5. You can use this arrangement exactly like the original Garmin RCT715 mount.

This product is not endoresed by Garmin Ltd. All trademarks are owned by their prespective rights holder. No warranties expressed or implied as to fitness for purpose.