Skandi Saigon, Function Kit (1:200, RC)

Parts in "Versatile Plastic Processed" material to complete the model of the  anchor handling tug "Skandi Saigon" in 1:200 scale to build in functions for RC operations:

• gearbox installation bow thruster
• 2 paddles for bow thruster
• gearbox installation stern thruster
• 2 paddles stern thruster
• radar motor bracket
• radar motor coupling
• smoke stack hose connector
• tow pin gears
• 2 rudder levers
• main crane rack (for rotation)
• main crane gear
• retaining ring for crane

To complete the model as a static model, four different sets of 3D prints are needed:

• Hull
• Superstructure
• Details 1 of 2 (parts in Versatile Plastic Processed)
• Details 2 of 2 (parts in Fine Detail Plastic)

To build a working RC model, the following set of printed parts is necessary, too:

• Function Kit (this set)

To complete the RC functions as an radio controlled model, further components are needed. It requires the advanced skills and experience to complete this. For the drive, the following parts are needed:

• one 4 gram servo for steering
  (e.g. https://www.banggood.com/de/4X-TowerPro-SG51R-5g-Plastic-Gear-Digital-Micro-Servo-For-RC-Airplane-p-1010677.html)
• two motors of RE-130 type for main propulsion
  (e.g. https://www.banggood.com/de/10Pcs-3V-6V-8000RPM-Micro-DC-130-Motor-p-964015.html)
• two shafts of 120 mm length
  (recommended: Graupner 414 or Modellbau Berthold MB 3074)
• two propellers of no more than 20mm diameter
  (recommended: Raboesch 170-41 und 170-42)
• coupling hose
  (recommended: Robbe R 1386)
• two micro motors M700 (7x16mm) for bow thruster and stern thruster
  (e.g. https://shop.kkpmo.com/index.php?cat=c332_7mm-diameter-7mm-diameter-332.html)
•  gears for bow thruster drive (M0.4, 17 teeth and two with 47 teeth, 2mm wide, 1mm holes)
  (e.g. https://shop.kkpmo.com/index.php?cat=c32_M0-4-spur-gear---gearwheels---pinions-M0-4---Gears---Pinion---Spurgear---0-4.html)
•  gears for stern thruster drive (M0.4, 11 teeth and two with 24 teeth, 2mm wide, 1mm holes)
  (e.g. https://shop.kkpmo.com/index.php?cat=c32_M0-4-spur-gear---gearwheels---pinions-M0-4---Gears---Pinion---Spurgear---0-4.html)
• RC system, batteries and controllers of your own choice, preferably a small system with a low weight

For the additional functions, the following parts are needed

• main crane beam lift function
  4gr servo or possibly bigger, e.g. https://www.banggood.com/de/4X-TowerPro-SG51R-5g-Plastic-Gear-Digital-Micro-Servo-For-RC-Airplane-p-1010677.html
• main crane rotation
  4gr servo or possibly bigger, e.g. https://www.banggood.com/de/4X-TowerPro-SG51R-5g-Plastic-Gear-Digital-Micro-Servo-For-RC-Airplane-p-1010677.html
• radar rotation
  G 700 type motor, e.g. by G700 by Sol Expert
• main winch rotation
  G136 geared motor, recommended: Sol Expert G136
• lift / withdraw tow pins
  4gr servo, e.g. https://www.banggood.com/de/4X-TowerPro-SG51R-5g-Plastic-Gear-Digital-Micro-Servo-For-RC-Airplane-p-1010677.html
• working smoke stack
  smoke generator  with 6mm hose connector,
  recommended product: Uwe Fleer NANO smoke generator  (parts usually available on ebay or through his website)

An assembly manual, a set of drawings and further informations can be found on my website (download section): http://www.microboathobby.com/