Black Natural Versatile Plastic
M27 Mock Charging Handle for Max Stryker Nexus Pro
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$37.67
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Direct bolt on. No disassembly or cutting into your Adventure Force Play Time Dart Zone SciFi blasters. Works for:
- Adventure Force (Dart Zone) Max Stryker Blaster
- Adventure Force (Dart Zone) Nexus Pro Blaster
It attaches to the back of the Max Stryker / Nexus Pro top Pictinny rail to make them look like a tradition rifle. It looks awesome.
You will also need two #6-32x1-1/4" screws and two #6-32 nut to fasten this mount to your blaster. Please do not over tighten. Over tighten metal screw on plastic part will cause the plastic to crack. Finger tight is more than sufficient for this part. The screws and nuts are not included, but can be easily sourced from your local hardware store (e.g. Home Depot, Lowes, etc.). You may also order them through the following Amazon links:
Stainless steel #6-32x1-1/4" screws:
http://www.amazon.com/gp/product/B07B7H8BJB?ie=UTF8&tag=airpower3d-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=B07B7H8BJB
Stainless steel #6-32 hex nuts:
http://www.amazon.com/gp/product/B01LWVIE7T?ie=UTF8&tag=airpower3d-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=B01LWVIE7T
Foam dart equipment used for illustration of this charging handle are not included. You can get the Adventure Force Nexus Pro rifle blaster from Amazon here:
http://www.amazon.com/gp/product/B08MTDK1F6?ie=UTF8&tag=airpower3d-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=B08MTDK1F6
Official AirPower3D retail partner. AirPower3D High Performance Plus (HP+) products are 3D printed using nylon polymer, shown in the photo, and are exceptionally strong. We can print to order any products in the AirPower3D full catalog. Check out the AirPower3D web site:
http://www.airpower3d.com/
- Adventure Force (Dart Zone) Max Stryker Blaster
- Adventure Force (Dart Zone) Nexus Pro Blaster
It attaches to the back of the Max Stryker / Nexus Pro top Pictinny rail to make them look like a tradition rifle. It looks awesome.
You will also need two #6-32x1-1/4" screws and two #6-32 nut to fasten this mount to your blaster. Please do not over tighten. Over tighten metal screw on plastic part will cause the plastic to crack. Finger tight is more than sufficient for this part. The screws and nuts are not included, but can be easily sourced from your local hardware store (e.g. Home Depot, Lowes, etc.). You may also order them through the following Amazon links:
Stainless steel #6-32x1-1/4" screws:
http://www.amazon.com/gp/product/B07B7H8BJB?ie=UTF8&tag=airpower3d-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=B07B7H8BJB
Stainless steel #6-32 hex nuts:
http://www.amazon.com/gp/product/B01LWVIE7T?ie=UTF8&tag=airpower3d-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=B01LWVIE7T
Foam dart equipment used for illustration of this charging handle are not included. You can get the Adventure Force Nexus Pro rifle blaster from Amazon here:
http://www.amazon.com/gp/product/B08MTDK1F6?ie=UTF8&tag=airpower3d-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=B08MTDK1F6
Official AirPower3D retail partner. AirPower3D High Performance Plus (HP+) products are 3D printed using nylon polymer, shown in the photo, and are exceptionally strong. We can print to order any products in the AirPower3D full catalog. Check out the AirPower3D web site:
http://www.airpower3d.com/
Details
What's in the box:
M27 Mock Charging Handle for Max Stryker Nexus Pro
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
