Click and drag to rotate
G19 M&P40 M&P9 Barrel Adapter with Bottom Rail 3d printed

DIGITAL PREVIEW
Not a Photo

White Natural Versatile Plastic
G19 M&P40 M&P9 Barrel Adapter with Bottom Rail 3d printed
G19 M&P40 M&P9 Barrel Adapter with Bottom Rail 3d printed

DIGITAL PREVIEW
Not a Photo

G19 M&P40 M&P9 Barrel Adapter with Bottom Rail

Made by
Print With Shapeways
Choose Your Material
$41.68
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
This Airsoft3D product is a front muzzle adapter for airsoft and BB pistol. It attached to the bottom rail of the pistol to give it a 14mm- threaded barrel up front. It is compatible with the following airsoft pistols

  - G19 (Umarex/Elite Force Glock 19, etc.)
  - M&P 9 (WE Big Bird, etc.)
  - M&P 40 (WE Big Bird, etc.)

When this device is attached, the original orange tip may need to be removed on some airsoft GBB gun models for them to cycle properly. Removing the orange tip may be unlawful in some regions. If you do remove the orange tip, you may need to permanently affix an orange tip to the front of the gun yourself. Please refer to your local laws.

This barrel adapter is a tight fit on the pistol receiver. You can secure it even further with a M3-4mm set screw. The screw is not include, but can be easily sourced from your local hardware store (e.g. Home Depot, Lowes, etc.). Use the set screw hole marked with 'G' for G19. Use the set screw hole marked with "M" for M&P.

Airsoft equipment used for illustration of this barrel adapter are not included.

WARNING: This barrel adapter is designed for airsoft and BB guns. It is NOT suitable for real firearms.

Official AirPower3D retail partner. AirPower3D High Performance Plus (HP+) products are 3D printed using nylon polymer, shown in the photo, and are exceptionally strong. We can print to order any products in the Airsoft3D / AirPower3D full catalog. Check out the Airsoft3D web site:
http://www.airpower3d.com/
Details
What's in the box:
G19 M&P40 M&P9 Barrel Adapter with Bottom Rail
Dimensions:
2.5 x 7.46 x 5.04 cm
Switch to inches
0.98 x 2.94 x 1.99 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.