Click and drag to rotate
35 mm Single Bolt Varia Mount 3d printed

DIGITAL PREVIEW
Not a Photo

Black PA12
35 mm Single Bolt Varia Mount 3d printed
35 mm Single Bolt Varia Mount 3d printed

DIGITAL PREVIEW
Not a Photo

35 mm Single Bolt Varia Mount

Print With Shapeways
Choose Your Material
$40.38
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
If you have issues with shreading the insides of your biking shorts because of a narrow stance and mounts that use bolts on the sides, here is a design that works. A single bolt placed on the rear side of the clamp moves it out of the way and prevents scrapping of your inner thighs. This mount is size specific for 35.0 mm seat posts or seat masts. 

Required Hardware (not included):
  • 1 - M5 X 18 mm - 20 mm (5 mm x 18/20 mm) socket head cap screw
  • 1- M5 (5 mm) nylon insert lock nut

Suggested installation method
  1. Mark the height of your seat post and remove it from the frame.
  2. Install the mount by inserting from the bottom of the post and sliding it up.
  3. Reinstall the seat post
  4. Move the Varia mount to the desired location and insert an M5 X 16 mm (5 mm X 16 mm) socket head cap screw and an M5 (5 mm) nylon insert lock nut in the recesses on both sides of the mount.
  5. Tighten the screw, please do not torque it down tight, it only needs to be as tight as necessary to hold it in place.
  6. Mount the Varia and RIDE!
Details
What's in the box:
35 mm Single Bolt Varia Mount v2
Dimensions:
6.37 x 4 x 3.46 cm
Switch to inches
2.51 x 1.57 x 1.36 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.