Click and drag to rotate
1/48 RN 4" MKV P Class Gun (B Mount) x1 3d printed 1/48 RN 4" MKV P Class Gun (B Mount) x1

DIGITAL PREVIEW
Not a Photo

1/48 RN 4" MKV P Class Gun (B Mount) x1
1/48 RN 4" MKV P Class Gun (B Mount) x1 3d printed 1/48 RN 4" MKV P Class Gun (B Mount) x1
1/48 RN 4" MKV P Class Gun (B Mount) x1 3d printed 1/48 RN 4" MKV P Class Gun (B Mount) x1

DIGITAL PREVIEW
Not a Photo

1/48 RN 4" MKV P Class Gun (B Mount) x1 3d printed 1/48 RN 4" MKV P Class Gun (B Mount) x1
1/48 RN 4" MKV P Class Gun (B Mount) x1 3d printed 1/48 RN 4" MKV P Class Gun (B Mount) x1

DIGITAL PREVIEW
Not a Photo

1/48 RN 4" MKV P Class Gun (B Mount) x1 3d printed 1/48 RN 4" MKV P Class Gun (B Mount) x1
1/48 RN 4" MKV P Class Gun (B Mount) x1 3d printed 1/48 RN 4" MKV P Class Gun (B Mount) x1

DIGITAL PREVIEW
Not a Photo

1/48 RN 4" MKV P Class Gun (B Mount) x1 3d printed 1/48 RN 4" MKV P Class Gun (B Mount) x1
1/48 RN 4" MKV P Class Gun (B Mount) x1 3d printed 1/48 RN 4" MKV P Class Gun (B Mount) x1

DIGITAL PREVIEW
Not a Photo

1/48 RN 4" MKV P Class Gun (B Mount) x1 3d printed 3d render showing adjustable Barrel
1/48 RN 4" MKV P Class Gun (B Mount) x1 3d printed 3d render showing adjustable Barrel

DIGITAL PREVIEW
Not a Photo

1/48 RN 4" MKV P Class Gun (B Mount) x1 3d printed 3d render showing product detail
1/48 RN 4" MKV P Class Gun (B Mount) x1 3d printed 3d render showing product detail

DIGITAL PREVIEW
Not a Photo

1/48 RN 4" MKV P Class Gun (B Mount) x1 3d printed
1/48 RN 4" MKV P Class Gun (B Mount) x1 3d printed

DIGITAL PREVIEW
Not a Photo

1/48 RN 4" MKV P Class Gun (B Mount) x1

Made by
Print With Shapeways
Choose Your Material
$264.21
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
1/48 Scale Royal Navy 4"/45 (10.2 cm) QF HA MKV with Shield (Sighting Ports open) for P Class Destroyers (HMS Penn, HMS Pakenham and HMS Petard). Highly detailed and created from plans and reference photos. Will require some assembly as part has been printed to minimise wax support contact. See My Shop for the A or Y Turret version, these had an angled rear roof: http://shpws.me/RfCn

Details include:
  • Set Contains 1 Mount suitable for B Mount (Straight Rear Roof)
  • No slip pattern, rivets, hex bolts, handrails, sighting, elevation and training mechanisms.
  • Barrel is printed separately and can be elevated as desired up to maximum of 80º
  • Kit comes in 6 Parts and will require some assembly

Historical Data
During the period just prior to World War I, the Admiralty decided to change the main armament for destroyers and cruisers away from bag guns (BL) over to quick firing guns (QF). QF guns had a higher rate of fire than did BL guns, an important factor for ships intended to be used in short range battles with enemy destroyers. The Mark V was first introduced as a low angle weapon on HMS Arethusa in 1914 and it was later chosen for use as an AAA gun near the end of World War I.

During the Battle of Heligoland Bight in 1914 HMS Arethusa lost the use of all of her 4" (10.2 cm) guns for a time due to problems with the cartridge ejectors. Her crew was eventually able to restore all but two of these guns to action.

Up until the late 1930s the Mark V was the main British long-range AA weapon and was fitted in a majority of capital ships and cruisers. Most ships fired fixed ammunition, but the World War I cruisers and "V" and "W" class destroyers fired separate ammunition. Still used in large numbers during World War II with many new guns being manufactured. Guns removed from capital ships and cruisers in the 1930s were reused on many warships during World War II, including all eight "P" and four "O" class destroyers. Also issued as star-shell guns in some Dido class cruisers and early "Battle" class destroyers.

The original Mark V was constructed of a tapered inner A tube, A tube, taper wound wire, full-length jacket and breech ring. Used a horizontal sliding breech block, opening to the right, with semi-automatic action. Mark V* had no inner A tube. An "A" added to either Mark V or Mark V* indicated a strengthened bolt actuating. Mark V** had a heavy autofretted loose liner with a muzzle bush on the jacket and a removable breech ring. This mod was used for repairing guns in 1937. Mark V*** differed in detail and had a sealing ring instead of a muzzle bush, and its liner could be changed on board. The Mark VB was the intended new loose liner gun, but none appear to have been completed. The final version, the Mark VC built during World War II, had a loose barrel, changeable on board, a shorter jacket, removable breech ring and sealing collar. Altogether 283 Mark VC and 554 earlier types were made for the Navy with about 107 additional guns being manufactured for the Army, where they were used as AA and coastal defense guns during World War I. Of these, 83 were later transferred to the Navy. Of the 637 earlier guns in naval service, 601 remained in 1939.

Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain.  It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.

Let your parts sit in direct sunlight for a few hours to fully cure the resin.  
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.      

Painting tips and preparation  



 
Details
What's in the box:
48 4" MK V Petard Straight Open Sprue.stl
Dimensions:
11.8 x 15.76 x 6.32 cm
Switch to inches
4.64 x 6.2 x 2.49 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.