Tan Fine Detail Plastic
AS2012-01 Axial SCX10 II F100 Supercharger (2 of 4
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$77.39
Basic Materials Best Value
Shop Owner Recommendations
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
We have decided that the Axial SCX10 II Ford F100 needs more horsepower...or to be more top-heavy...we don't know. Either way, this kit will allow you to add a supercharger to your F100 with only the addition of a giant hole to your body. This set directly fits the SCX10 II F100 but we are sure you can adapt it to other cars.
The supercharger is a very large and very detailed part. If you choose versatile plastic, a lot of the details can be muted or missing entirely but it will be much more durable.
You will also need the
AS2002-0A Axial SCX10 II F100 SC Mount
AS2013-0A Axial SCX10 II F100 Air Cleaner
AS2013-0A Axial SCX10 II F100 Detail Parts
Additional parts needed to complete the build:
BOM List:
1. 3mm steel rod, 28mm & 34mm
2. Mabuchi 130 motor
3. 2 M3x8mm countersunk machine screws
4. 10x m3x6mm screw or m3x6mm set screw to hold down engine mount
5. Tube - 5mm ID, 6mm OD, cut to 20mm
6. Micro Servo - Case Dim 22.9 wide, 22.8 deep, 12 tall. See the image in the video. the depth offsets may vary. Spacers may be needed.
7. 1mm thick rod for servo to carb linkages
Please see the installation and detail video below prior to purchase.
The supercharger is a very large and very detailed part. If you choose versatile plastic, a lot of the details can be muted or missing entirely but it will be much more durable.
You will also need the
AS2002-0A Axial SCX10 II F100 SC Mount
AS2013-0A Axial SCX10 II F100 Air Cleaner
AS2013-0A Axial SCX10 II F100 Detail Parts
Additional parts needed to complete the build:
BOM List:
1. 3mm steel rod, 28mm & 34mm
2. Mabuchi 130 motor
3. 2 M3x8mm countersunk machine screws
4. 10x m3x6mm screw or m3x6mm set screw to hold down engine mount
5. Tube - 5mm ID, 6mm OD, cut to 20mm
6. Micro Servo - Case Dim 22.9 wide, 22.8 deep, 12 tall. See the image in the video. the depth offsets may vary. Spacers may be needed.
7. 1mm thick rod for servo to carb linkages
Please see the installation and detail video below prior to purchase.
Details
What's in the box:
as2012-01_0-2_supercharger
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
