Click and drag to rotate
LiebLTM11200 crane rev3 3d printed

DIGITAL PREVIEW
Not a Photo

LiebLTM11200 crane rev3 3d printed
LiebLTM11200 crane rev3 3d printed

DIGITAL PREVIEW
Not a Photo

LiebLTM11200 crane rev3 3d printed
LiebLTM11200 crane rev3 3d printed

DIGITAL PREVIEW
Not a Photo

LiebLTM11200 crane rev3 3d printed
LiebLTM11200 crane rev3 3d printed

DIGITAL PREVIEW
Not a Photo

LiebLTM11200 crane rev3 3d printed
LiebLTM11200 crane rev3 3d printed

DIGITAL PREVIEW
Not a Photo

LiebLTM11200 crane rev3 3d printed
LiebLTM11200 crane rev3 3d printed

DIGITAL PREVIEW
Not a Photo

LiebLTM11200 crane rev3 3d printed
LiebLTM11200 crane rev3 3d printed

DIGITAL PREVIEW
Not a Photo

LiebLTM11200 crane rev3 3d printed
LiebLTM11200 crane rev3 3d printed

DIGITAL PREVIEW
Not a Photo

LiebLTM11200 crane rev3 3d printed
LiebLTM11200 crane rev3 3d printed

DIGITAL PREVIEW
Not a Photo

LiebLTM11200 crane rev3 3d printed
LiebLTM11200 crane rev3 3d printed

DIGITAL PREVIEW
Not a Photo

LiebLTM11200 crane rev3 3d printed
LiebLTM11200 crane rev3 3d printed

DIGITAL PREVIEW
Not a Photo

LiebLTM11200 crane rev3 3d printed
LiebLTM11200 crane rev3 3d printed

DIGITAL PREVIEW
Not a Photo

LiebLTM11200 crane rev3

Made by
Print With Shapeways
Choose Your Size
$33.61
Choose Your Material
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Rev3 April2019 to try to allow easier wax removal and reduce lost parts with thicker sprues that should be removed after ultrasonic cleaning/painting. 
Rev2: added hook, thread holes, second set of larger stabilizer platforms.
I can't guarantee any moving part design will work.  Painted pics are of earlier versions.

The LTM 11200-9.1 is the world's most powerful crane (probably the biggest too) so I had to try to make it in miniature.  This  took 40 hours to build in Solidworks!  Of course being so small I had to make a lot of changes.  I can't guarantee moving parts but this was designed to have these features:
1. Stabilizing legs can swing out and rest on stabilizer platforms. (can be removed from main body)
2. Crane can rotate left/right. (can be removed from main body)
3. Rear crane control pod can swing out.  (captured-do not try to separate from main unit)
4. Main boom can swing up/down.  (captured-do not try to separate from main unit)
5. Secondary boom can extend. (can be removed from main body)
6. Hook needs to be broken off front end.
7.  Cable spools have 0.5mm holes to run thread up the boom and hang the hook.

I don't know if the parts will move after painting.  All of my models meet the Shapeways minimum gap for moving parts but they are still trial and error with paint.  You have to paint with an airbrush as the moving part gaps on this are only 0.2mm on the 1/400 model.  
Details
What's in the box:
Liebh LTM 11200
Dimensions:
0.9 x 1.21 x 7.74 cm
Switch to inches
0.35 x 0.47 x 3.05 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.