You must be logged in and verified to contact the designer.
Product Description
Wheatley Personality Core head and wire bundle that replaces the face mask, robot skull head, and cowl on all Questoris and Dominus class Knights.
COMPATIBILITY
These accessory components are compatible with all Questoris and Dominus class Knights.
BEFORE PAINTING - CLEANING INSTRUCTIONS
For cleaning instructions, and how to contact Shapeways customer service in case of any issues, click here.
ATTACHING INSTRUCTIONS
1) Glue the wire bundle to the section where the head is normally attached.
2) I have designed the head to swivel and be removable by using small magnets.
3) I have included the link to these magnets here. Two of these small 1/8" x 1/8" Rare Earth Disc Magnets are required.
4) You can also glue the head in place and skip the magnets completely, though it WILL NOT rotate.
5) Snip the roll cage bars off of the small sprue, and GENTLY pull the ends apart to snap them in to place on the round head, they may be glued into place for a more permanent pose.
6) The head has been made hollow, and the frontal occulus ring and lens have been made as separate components (all included in this listing). This way an LED light (of up to 6mm in diameter) may be inserted through the back of the head, while the clear lens can be sanded or left frosted so light may shine out.
NOTE that because the lens arrives frosted, it is up to you to sand and finish it as you see fit depending on how clear you would like it to appear. The consistency of frosting on the lens may not always be even all the way through.
7) I suggest painting the INSIDE of the head a dark color so the light does not shine through the plastic.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: