Click and drag to rotate
070005-01 CW01 HD Wide Front Suspension Set 3d printed

DIGITAL PREVIEW
Not a Photo

Gray PA12
070005-01 CW01 HD Wide Front Suspension Set 3d printed
070005-01 CW01 HD Wide Front Suspension Set 3d printed

DIGITAL PREVIEW
Not a Photo

070005-01 CW01 HD Wide Front Suspension Set

Print With Shapeways
Choose Your Material
$40.57
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
NOTE - NYLON IS NO LONGER OFFERED AS THE MATERIAL IS WEAKER THAN THE NEW FUSION PRINTS. THESE CAN BE PAINTED ANY COLOR YOU WANT AS THE NYLON VERSIONS WERE ALL WHITE AND DYED LOCALLY AT SHAPEWAYS

This is the heavy-duty wide or 8mm offset front suspension set. This kit has reinforced arms with a thin, 2mm wall through the center of the arms and requires a 2mm rod to be inserted through the pivot point and glued in place. The hole will need to be cleaned out using a 2mm drill bit before inserting the rod. Replacement arms are part number 070005-02.

There is no denying that the Lunchbox and Midnight Pumpkin are two of the most iconic RC cars ever. All the wheelie popping fun never tires! Now you can upgrade your CW01 to have double-wishbone front suspension! All without a single modification to the chassis. Ampro's CW01 front end will allow you to install new a-arms, uprights and a central pivot to existing screw holes. Just add an upper-threaded link and you are all set! This is a 8mm per side offset front end, perfect for racing and jumping. The zero offset version is also available. Please remember to clean all holes with a 3mm drill bit to prevent binding. Mounts for threaded ball ends are designed for M3 screw diameters.  

*IMPORTANT NOTE*
The CW01 chassis has large tires that add more stress to this front suspension. It is not recommended that you run anything other than the stock silver can motor. A hard impact will break this front end. This is not intended for anything other than a very light runner. We are not responsible for broken parts, nor is Shapeways unless there is a defect in the print. This is a fun simple upgrade for your CW01 but please understand that this front end is not as strong as the original and should not be used for bashing of any kind at all. 

PN:070002-03

 

Video of installation and running can be found here:

https://youtu.be/J7XNSKyuezY

                
Details
What's in the box:
070005-01 CW01 HD Wide Front Suspension Set
Dimensions:
7.51 x 3.64 x 14.79 cm
Switch to inches
2.96 x 1.43 x 5.82 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.