Click and drag to rotate
Evans/Bierstadt, Colorado, USA, 1:25000 3d printed

DIGITAL PREVIEW
Not a Photo

Evans/Bierstadt, Colorado, USA, 1:25000 3d printed
Evans/Bierstadt, Colorado, USA, 1:25000 3d printed

DIGITAL PREVIEW
Not a Photo

Evans/Bierstadt, Colorado, USA, 1:25000 3d printed
Evans/Bierstadt, Colorado, USA, 1:25000 3d printed

DIGITAL PREVIEW
Not a Photo

Evans/Bierstadt, Colorado, USA, 1:25000 3d printed
Evans/Bierstadt, Colorado, USA, 1:25000 3d printed

DIGITAL PREVIEW
Not a Photo

Evans/Bierstadt, Colorado, USA, 1:25000 3d printed
Evans/Bierstadt, Colorado, USA, 1:25000 3d printed

DIGITAL PREVIEW
Not a Photo

Evans/Bierstadt, Colorado, USA, 1:25000 3d printed
Evans/Bierstadt, Colorado, USA, 1:25000 3d printed

DIGITAL PREVIEW
Not a Photo

Evans/Bierstadt, Colorado, USA, 1:25000

Made by
Print With Shapeways
Choose Your Material
$319.00
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Look West from Denver and you'll see the (usually snow-capped) summit of Mt. Evans. Just behind it is another fourteener, Mt. Bierstadt. Together, these peaks in Pike National Forest form a popular day hike for Colorado's peakbaggers. If a strenuous workout is not your thing, you can drive to within a few hundred feet of the summit on the Mount Evans Scenic Byway. This is the highest paved road in North America, but being so high, is only open for a few summer months. However you get to the top, you'll enjoy hundred-mile views of the front range, deep glacial cirques, and dramatic sunrises and sunsets. Our model of Evans and Bierstadt features a big chunk of the Chicago Peaks as well, and is sure to be your reference and inspiration for years to come.

Model scale is 1:25000
Model measures 9.6" x 7.4" x 1.77" (24 x 18.7 x 4.5 cm)
Original area is approximately 3.8 by 2.9 miles
Altitudes covered: 11443' to 14270'
There is no vertical exaggeration applied to this model. This is a true-to-life scale model of a real place.

Click here for more sizes.
Click here for other 1:25000 models.

TinyMtn models are most affordable in the "Sandstone" and "White Strong and Flexible" materials. This model is in "Sandstone," which is a glued gypsum material. When you receive the model it will be ready for display, though it may smell funny and need some time to air out. "Sandstone" models are much more brittle than "White Strong and Flexible" models, but feel more like light stone. Do not soak it in water, though you can safely seal it with Polycrylic or a similar water-based clear spray sealant. Read more about this popular material here.

All TinyMtn models have hollow bottoms - this is to save on weight, and thus cost. Many larger models also have extra flanges on their undersides to increase rigidity and strength. To make the model more solid, you should feel free to carefully pour resin into the bottom cavity, or glue a properly-sized slab of wood or another material into it.

These models have been optimized for the above materials, and are not offered in other materials for strength or cost reasons. If you need one in another material, please tinymtnbiz@gmail.com and we'll do our best to fulfill your request.

(C) 2018 TinyMtn (TM)
Model created using GDAL, NetPBM, Gmsh, Carve, MeshLab, and other custom software
Source of digital elevation and aerial orthoimagery data: U.S. Geological Survey
The USGS home page is https://www.usgs.gov/
Details
What's in the box:
Evans/Bierstadt, Colorado, USA, 1:25000
Dimensions:
24.4 x 18.74 x 4.48 cm
Switch to inches
9.61 x 7.38 x 1.77 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.