Rotate N20 motor 90 degrees
SL2-MK4 HO Slot Car Chassis 4-PACK
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$29.00
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
We've reduced printing costs by eliminating optional parts that most builders didn't use, and ganged them up in a 4-pack by connecting the parts with sprues. For the builders who are familiar with this chassis, you'll know how to build them. If you're not, look at the instructional info on the individual chassis offered here in the HWP store.
The SL2-Mk4 is one of the narrowest HO slot car chassis available! Narrower than the Mega G/G+. Perfect for custom builders. Chassis axle spacing is backwards compatible with many T-Jet screw-on bodies.
The chassis features a fully adjustable wheelbase and N20 motor easy-mount system. New universal motor cradle should tightly hold most variations of the N20 can motor. Allows for fore-aft positioning of motors with short drive shafts. Simply slide the motor in, rotate 90 degrees and attach the motor clip to lock it in.
Optional motor clips are available which allow the fitting of many major body types including AFX Magnatraction/AW X-traction, AFX Super G+, Tomy AFX Mega G/G+*, Tyco 440X2 (Wide and Narrow), AW Super III, MicroScalextric, and Lexan bodies, with more on the way!
You need to provide your own N20 motor, braids, axles, wheels, tires, gears, wires, etc. You can use your choice of axles, crown & pinion gears. For those who haven't built one of the SL chassis before, the axle holes are deliberately undersized so the builder can drill them to the axle diameter of their preference. Use a drill bit and twist by hand to open up the axle holes. Use sandpaper or jewelers file to open up the rear axle slots until you get a secure snap-in fit.
Also available as a single pack.
The SL2-Mk4 is one of the narrowest HO slot car chassis available! Narrower than the Mega G/G+. Perfect for custom builders. Chassis axle spacing is backwards compatible with many T-Jet screw-on bodies.
The chassis features a fully adjustable wheelbase and N20 motor easy-mount system. New universal motor cradle should tightly hold most variations of the N20 can motor. Allows for fore-aft positioning of motors with short drive shafts. Simply slide the motor in, rotate 90 degrees and attach the motor clip to lock it in.
Optional motor clips are available which allow the fitting of many major body types including AFX Magnatraction/AW X-traction, AFX Super G+, Tomy AFX Mega G/G+*, Tyco 440X2 (Wide and Narrow), AW Super III, MicroScalextric, and Lexan bodies, with more on the way!
You need to provide your own N20 motor, braids, axles, wheels, tires, gears, wires, etc. You can use your choice of axles, crown & pinion gears. For those who haven't built one of the SL chassis before, the axle holes are deliberately undersized so the builder can drill them to the axle diameter of their preference. Use a drill bit and twist by hand to open up the axle holes. Use sandpaper or jewelers file to open up the rear axle slots until you get a secure snap-in fit.
Also available as a single pack.
Details
What's in the box:
HWP_SL2-Mk4_4Pack_Release
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
