Click and drag to rotate
MF_engineflaps_v0.2_complete set 3d printed This pictures content is printed in FXD

DIGITAL PREVIEW
Not a Photo

This pictures content is printed in FXD
MF_engineflaps_v0.2_complete set 3d printed This pictures content is printed in FXD
MF_engineflaps_v0.2_complete set 3d printed This pictures content is printed in FXD

DIGITAL PREVIEW
Not a Photo

MF_engineflaps_v0.2_complete set 3d printed Above: out of box, doen: primed 1x
MF_engineflaps_v0.2_complete set 3d printed Above: out of box, doen: primed 1x

DIGITAL PREVIEW
Not a Photo

MF_engineflaps_v0.2_complete set 3d printed
MF_engineflaps_v0.2_complete set 3d printed

DIGITAL PREVIEW
Not a Photo

MF_engineflaps_v0.2_complete set

Made by
Print With Shapeways
Choose Your Material
$35.83
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Die deutsche Erläuterung findet ihr weiter unten.

English:
In my opinion a nice enhacement for the Deagostini falcon kit. Not part of the origial movie falcon. But the inner engine flaps do look boaring to me for a display model not in motion. 

This is not "first to try". Like the photos show the flaps where already printed successfull. I only changed the dimension of the sprue to ensure that nothing breakes in production (polishing and cleaning).

Special offer if ordered before 3rd of march:
This item is offered at a special price (about 25% off) when ordered befor March 3rd 2018. If sales will cover my test prints costs, it might remain at this price. If not I might set it back to my earlier calculated margin.

Info:
Here you get a complete set of 30 peaces for both, the upper and the downsite engine area. The complete set offers 26 inner flap parts and 4 side parts. Even in Strong & flexible it looks great after primed. Of course FXD offers all the detail. I doent know why my FUD testprint came out slighlly warped. It is not visible when glued tu the Engine exhaust, but because my test did not show the detail even S&F did and it safed only about ten bucks compared with the highest quality FXD print I canceled this material from my offer.

Tip:
Before you glue it to the base part, place it dry for test. There must be a space around 1 millimeter between each flap.


Deutsch/German:
Meiner Meinung nach eine schöne Erweiterung für den falken. Die Zusatzdetailierung war im Original nicht vorhanden. Aber ich fand, dass die undetailierte Triebwerksöffnung im Standmodell recht langweilig wirkt.

Anmerkung:
Dieses Modell ist nicht wirklich "First to try". Wie aus den Photos ersichtlich, wurden die Flaps bereits erfolgreich gedruckt. Ich habe lediglich die Dimensionen des Verbindungsträgers geändert, um sicherzustellen, dass der gesamte Druck in der Nachbearbeitung (Reinigung und pollieren) nicht in mehrere teile zerfällt.

Angebotspreis für Bestellungen bis zum 03. März 2018:
Meine hier angebotenen Engine Flaps sind zum angegebenen Sonderpreis (etwa 25% Rabatt) erhältlich, wenn sie bis einschließlich 03.03.2018 bestellt werden. Wenn die Verkäufe bis zu diesem Stichtag meine Kosten für den Testdruck decken, werde ich diesen Preis beigehalten. Wenn nicht, werde ich den Preis wieder heraufsetzen.

Info:
Angeboten wird hier der komplette Satz für die innere  Ober- und Unterseite der Triebwerksöffnung, bestehend aaus 30 Teilen! 26 Platten für Innen und 4 für den äußeren Abschluss. Selbst in Strong & flexible polished sehen die Teile schon super aus, wenn sie grundiert sind. Natürlich zeigt FXD selbst die feinsten Details. Ich kann nicht sagen warum, aber mein FUD Testdruck kam nicht nur leicht gebogen aus dem Druck. Er zeigte auch nicht die Details, die bei Strong & flexible noch sichtbar waren. Das dürfte ein Einzelfall gewesen sein, da der Preisvorteil gegenüber FXD jedoch jedoch nur knapp 10 Euro betrug, habe ich mich entschieden, dieses Material nicht weiter anzubieten.

Tip:
Bevor Du die einzelnen Platten verklebst, setze sie "trocken" auf, um die Plazierung auszurichten. Zwischen den einzelnen Teilen sollte ein Abstand von jeweils etwa einem Millimeter gelassen werden.
Details
What's in the box:
engineflaps_17_double
Dimensions:
7.25 x 3.91 x 2.08 cm
Switch to inches
2.85 x 1.54 x 0.82 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.