CB Umbra Eagles Sniperscope S* 28mm

[Umbra Eagles pattern]
Sniper Scope for 28mm scale Firearms.

Contains:
20x Sniper Scopes
(S* = Sprue)
* Updated sprue and mesh makes it cheaper to produce! Now you get 20x for the same price!

Description
The Umbra Eagles pattern Esight-10x is an advanced optical solution for mid to long-range targeting. Featuring a dual-color Mil-Dot Illuminated Reticle, the 3-9x42 square Scope can provide accurate targeting in any lighting situation. This scope features external locking windage and elevation knobs for quick and secure adjustments for your soldiers.
(Changing gamerules or stats is up to users)(Does not actually improve your dice rolls while trying to hit target)
(Above description text is just fiction)

___________________________________________
Cleaning Information Steps
Parts might need to be cleaned extra when printed in Extreme quality frosted material.
1. Check for damage
2. Remove excess WAX residue from production process
with simple green and a soft brush with warm water.
3. Put the 3d printed product in sunlight to harden/cure for 2-3 hours.
Make sure its not too hot or the resin, or it might deform due to heat. under 30 degrees is fine.
4. Or check out in case of any issues: https://www.shapeways.com/blog/archives/22021-tips-n-tricks-for-painting-miniatures.html

Painting Information

• Use water-based acrylic paints meant for miniature plastics is highly recommended.
• Other paints, especially enamels, may not cure if applied DIRECTLY on Frosted Detail 3D-printed plastics.

(But if it has a base coat it works fine.)

• Use dedicated model sprue cutters to remove parts to minimize the risk of damage to the parts.

  
DISCLAIMER:

• This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop.
• Not meant for children 14 years or younger
• These custom designed conversion components will arrive unpainted.