Top Force One-Piece Rear Arms
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$35.61
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
One-piece rear lower suspensionarms for the Tamiya Top Force. The geometry is the same as the original two-piece arms however these are more rigid and will give more direct handling.
These arms will also fit other DF01 models such as the Manta Ray, Dirt Trasher, Terra Conquerer and Blazing Star.
Have a look at my shop for other parts for the Tamiya Top Force and more.
The two arms come together on a sprue. Some finishing is required to fit the arms to the chassis.
You will have to cut off the sprue, and pre-drill the holes in the arms. For the suspension pins I recommend using a 3.0mm or 3.1mm drill bit. For the screw holes I recommend using a 2.5mm drill bit (and pre-threading with an M3 tap if you're using metric screws/ballstuds).
These arms will also fit other DF01 models such as the Manta Ray, Dirt Trasher, Terra Conquerer and Blazing Star.
Have a look at my shop for other parts for the Tamiya Top Force and more.
The two arms come together on a sprue. Some finishing is required to fit the arms to the chassis.
You will have to cut off the sprue, and pre-drill the holes in the arms. For the suspension pins I recommend using a 3.0mm or 3.1mm drill bit. For the screw holes I recommend using a 2.5mm drill bit (and pre-threading with an M3 tap if you're using metric screws/ballstuds).
Details
What's in the box:
TF Rear Arms
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
