Scorpion vz. 61 Barrel Adapter (14mm-)

Airsoft adapter to convert Vz. 61 SMG orange tip to accept standard 14mm- airsoft muzzle devices. This Airsoft3D adapter slides onto the front of your Vz. 61 airsoft machine pistol. There is no need to remove the orange tip with this adapter. It is compatible with the following VZ61 airsoft SMG and other VZ61 clones (some modification may be required):

- JG Scorpion R2 VZ61 VZ-61 100% Tokyo Marui Clone Airsoft Electric SMG

This adapter will fit the Vz. 61 orange tip with a 11.9mm outer dimension and a 13.4mm locking ring diameter. See our diagram for measurements. This barrel adapter has been tested on the Vz. 61 AEP.

You will need two M4-0.7x4mm set screws to fasten this barrel adapter to the orange tip. The screws are not included, but can be easily sourced from your local hardware store (e.g. Home Depot, Lowes, etc.). Or you can order the set screws from Amazon here:

Assorted set screws:
http://www.amazon.com/gp/product/B07M7CLTLT?ie=UTF8&tag=airsoft3d-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=B07M7CLTLT

Airsoft equipment used for illustration of this barrel adapter are not included. You can get the JG Scorpion R2 VZ61 Airsoft Electric SMG from Amazon here:
http://www.amazon.com/gp/product/B07JZGZ3W1?ie=UTF8&tag=airsoft3d-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=B07JZGZ3W1

Disclaimer: Please use discretion when installing custom parts as fit and compatibility may vary. Some modification may be required. Professional installation recommended.

Official AirPower3D retail partner. AirPower3D High Performance Plus (HP+) products are 3D printed using nylon polymer, shown in the photo, and are exceptionally strong. We can print to order any products in the Airsoft3D / AirPower3D full catalog. Check out the Airsoft3D web site:
http://www.airpower3d.com/