Smooth Fine Detail Plastic
HO WCK LQ Bracket Signal Steel Post Fittings
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$17.52
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a set of detail parts for the steel round dolly posts for the Werris Creek UP Platforms Bracket Signal.
The parts have been designed to go onto a dolly post made from 0.042 inch stainless steel tubing, a product of Ngineering brand product.
The Werris Creek UP Platforms Bracket Signal is available from the Signals Branch shop in brass here.
The Ngineering product numbers for the tubing are:
Ngineering 0.042 inch stainless steel tubing - N2042-2 (2 pack) or N2042-4 (4 pack)
The only source for this tubing that I have found in Australia is the Model Railroad Craftsman at Blacktown NSW. The tubing is not listed on the web site shop so must be ordered over the phone or of course by purchasing at the shop.
Alternatively Ngineering has a web site from which the tubing may be ordered:
http://ngineering.com/tubing.htm
Instructions for cutting the tubing are available on the Ngineering web site here:
http://ngineering.com/tubing_cutting_tips.htm
I investigated the Ngineering shipping cost to Australia and it was US$10.00
If you wish to light the signal lamp then the hole in the 0.042 inch tubing is large enough to easily fit the wire on a 0603 SMD Warm White LED and might possibly also fit a second set of wires for a signal with two signal arms on the one post.
The parts have been designed to go onto a dolly post made from 0.042 inch stainless steel tubing, a product of Ngineering brand product.
The Werris Creek UP Platforms Bracket Signal is available from the Signals Branch shop in brass here.
The Ngineering product numbers for the tubing are:
Ngineering 0.042 inch stainless steel tubing - N2042-2 (2 pack) or N2042-4 (4 pack)
The only source for this tubing that I have found in Australia is the Model Railroad Craftsman at Blacktown NSW. The tubing is not listed on the web site shop so must be ordered over the phone or of course by purchasing at the shop.
Alternatively Ngineering has a web site from which the tubing may be ordered:
http://ngineering.com/tubing.htm
Instructions for cutting the tubing are available on the Ngineering web site here:
http://ngineering.com/tubing_cutting_tips.htm
I investigated the Ngineering shipping cost to Australia and it was US$10.00
If you wish to light the signal lamp then the hole in the 0.042 inch tubing is large enough to easily fit the wire on a 0603 SMD Warm White LED and might possibly also fit a second set of wires for a signal with two signal arms on the one post.
Details
What's in the box:
HO WCK LQ Steel Post Fittings - 1_1mm Fine v32
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
