You must be logged in and verified to contact the designer.
Product Description
The NCYota Double Shear Knuckles and Lockouts by BowHouse RC work on all versions of the NCYota axles, as well as on GCM TM8/TMX and Vaterra Ascender axles. The double shear knuckle design provides extra strength as well as multiple mounting options for your steering links (tie rod can be mounted between double sheer arms or above the top arm).
Features:
Double-shear knuckle design for extra strength, durability and steering response
Mechanical stop on knuckles to help protect against over-steering
Improved geometry vs. stock Ascender knuckles to reduce stress on CVDs
Improved wheel/tire clearance compared to stock Ascender knuckles
Lockouts feature integrated brake dust shield
Bolt-on solution uses stock hardware with no modifications required
Please note that the set includes one left knuckle, one right knuckle, and two bearing caps connected by a sprue. The individual parts can be cut free from the sprue using a hobby knife. The white dot left where the sprue was removed can be touched up easily with a black permanent marker.
Change Log:
2/4/18: updated bearing hole from 10mm to 10.05mm to account for printing tolerances. 11/1/17: updated angle of double shear for better ball end clearance.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: