Losi micro rock crawler 3D printed chassis (mounted)
Losi Micro Rock Crawler 3D printed KIT
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$168.73
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is the complete upgrade kit for the Losi Micro Rock Crawler.
The wheelbase increase from 101,6 mm to 135 mm and the width from 86,36 to 110 mm.
The kit includes:
1x Chassis
1x Roof (with battery and electronic mount)
4x shock mounts
4x lower extended link
4x upper link with spring function
4x wide rims
4x wheels nut
2x Extended telescopic shafts
In the pictures it is possible to see the final product.
You can use all the original parts (uniballs, screws, axles, ecc...) and much powerfull batteries (with original electronics).
For a better weight distribution the motor faces to the rear axle.
You don't need springs, the upper links work like a spring, the movement is locked by an addition and not included grub screw (see the picture related to the bottom view).
For a better assembly you need to clean all the holes with a small screwdriver, and the male side of the telescopic shaft with a very fine sandpaper (1000 is sufficient).
With this kit the model have much more performance.
Stay tuned for video in action
The wheelbase increase from 101,6 mm to 135 mm and the width from 86,36 to 110 mm.
The kit includes:
1x Chassis
1x Roof (with battery and electronic mount)
4x shock mounts
4x lower extended link
4x upper link with spring function
4x wide rims
4x wheels nut
2x Extended telescopic shafts
In the pictures it is possible to see the final product.
You can use all the original parts (uniballs, screws, axles, ecc...) and much powerfull batteries (with original electronics).
For a better weight distribution the motor faces to the rear axle.
You don't need springs, the upper links work like a spring, the movement is locked by an addition and not included grub screw (see the picture related to the bottom view).
For a better assembly you need to clean all the holes with a small screwdriver, and the male side of the telescopic shaft with a very fine sandpaper (1000 is sufficient).
With this kit the model have much more performance.
Stay tuned for video in action
Details
What's in the box:
Micro Rock Crawler Chassis Complete KIT 1
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
