1:8 BTTF DeLorean Flux Capacitor set 1 of 2

We can provide you our dedicated electronics board that features an extremely accurate Flux and Time Travel sequence. For inquiries email us at 3Dynamicsdesigns@gmail.com 

Please note: when ordering from Shapeways you will only receive 3D printed parts for painting and assembling yourself.

1:8 BTTF Delorean Flux Capacitor set 1 of 2 This is the flux capacitor you've been waiting for. It is a perfect 1:8 scale replica of the Flux Capacitor as seen in the Back to the Future trilogy. I've recreated the Stahlin enclosure in the most tiny details to give you the best Flux Capacitor that can be made in this scale using current techniques. This flux capacitor has been designed to perfecty match the Eaglemoss 1:8 Delorean model.

What's in this set:

1. Stahlin enclosure including lip at the back as seen in the A version of the car
2. Backboard

To be able to build your own flux capacitor you also need one of the two variants of set 2 of 2 available here:

• 1:8 BTTF Delorean Flux Capacitor set 2 of 2 Ultimate Version Without Gasket
• 1:8 BTTF Delorean Flux Capacitor set 2 of 2 Ultimate Version With Gasket

Assembly and painting
Parts just fit over each other and need to be glued onto each other, I made two video's that you can find on YouTube by using the links below:

• Painting the flux capacitor - part 1 (paints)
• Painting the flux capacitor - part 2 (painting and assembling the flux)

I've also added the pins on the lower lip of the enclosure in order to still be able to install cables 59C and 59D from issue 59. You can remove the pins on the bulkhead by using a Xuron knife.

Electronics board
A plug and play electronics board that connects to port 16 of the EM board (and optional Arduino control) is now available. Here's the link to a video of the final product:

• 1:8 scale Flux Capacitor electronics board