You must be logged in and verified to contact the designer.
Product Description
Miniature space station for Fleet Commander boardgame (or anything else you fancy).
Dimensions are about 50mm outer diameter, 30mm height.
It has a 3mm diameter (0.12") hole under to fit on a fight stand (Litko or equivalent).
Two set "sizes" :
- Small : One space station (1 pc)
- Medium : Two space stations (2 pcs) Select the desired size in the top-right menu.
Parts are attached with a link, just cut it and the parts fall.
The model comes unpainted. It has a single colour.
If you want to paint it, the process is almost identical to any regular plastic miniature. Some recommendations:
- With White Plastic : Wash the model, to remove any remaining nylon powder. Use soapy water, rub with toothbrush, rinse, let dry. Spray prime (you can apply more primer coats than usual, though), paint, spray varnish.
- With Fine Detail Plastic only : Wash the model, to remove any remaining wax. Approx. 3 minutes in acetone, or approx. 30 minutes in denaturated alcohol, or approx. 30 minutes in Simple Green. Rub gently with a toothbrush, rinse with water, let dry. Spray prime, paint, spray varnish.
Note :
-Due to manufacturing tolerances, the 3mm hole might need some rework to fit nicely on the flight stand's peg.
-The flight stands are not included.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: