Click and drag to rotate
Bloch MB.152 3d printed

DIGITAL PREVIEW
Not a Photo

White Natural Versatile Plastic
Bloch MB.152 3d printed
Bloch MB.152 3d printed

DIGITAL PREVIEW
Not a Photo

Bloch MB.152

Made by
Print With Shapeways
Choose Your Size
$7.04
Choose Your Material
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Multipacks
1:200 Frosted Ultra Detail 
x2 | x3 | x4

The Bloch MB.150 (later MB.151 to MB.157) was a French low-wing, all-metal monoplane fighter aircraft with retractable landing gear and enclosed cockpit, developed by Société des Avions Marcel Bloch as a contender in the 1934 French Air Ministry competition for a new fighter design.Although the competition was won by the Morane-Saulnier M.S.406 prototype, development proceeded culminating in the first attempted flight of the MB.150.01 prototype in 1936. Unfortunately, the aircraft proved unable to leave the ground. With modifications consisting of a strengthened wing of greater area, revised landing gear and installation of a 701 kW (940 hp) Gnome-Rhone 14N-0 radial engine with a three-blade constant speed propeller, the MB.150 finally flew in October 1937.

Handed over to the Centre d'Essais du Materiel Aerien (CEMA) for service trials, its performance proved sufficiently interesting to warrant further development. This brought, at the very beginning of 1938, a small increase in wing span and installation of a 14N-7 engine. When trials were completed in late spring 1938, SNCASO was awarded an order for a pre-production batch of 25 aircraft.

No production of the MB-150.01 occurred, the aircraft being unsuitable for mass production. Redesign led to the MB.151.01 and MB.152.01 prototypes, developed and produced in parallel. By the outbreak of World War II, some 120 had reached the Armée de l'Air, but few of them were flyable, most missing their gunsights and propellers.

The MB.153 and MB.154 were intended as testbeds for American engines, but only the MB.153 flew, and when it crashed a few days later as damaged beyond repair, pursuit of these alternatives also ceased. Instead, attention shifted to extending the range of the MB.152. This was achieved by moving the cockpit aft in order to make room for a new fuel tank. Other modifications included a slightly broader wing and revised aerodynamics around the cowling. The result, named MB.155 performed favourably in flight tests and was ordered into production in 1940, but only 10 aircraft had been completed by the Fall of France. Under the terms of the armistice, the remaining 25 on the production line were completed and delivered into Vichy service. From there, some eventually made their way into the Luftwaffe after 1942.

The final member of the family, the MB.157 had a far more powerful engine and eventually became a very different aircraft as the design evolved from the MB.152 to accommodate the larger and heavier motor. Unfinished at the time of the armistice, it was ordered to be completed and flown under German supervision. Demonstrating superb performance, it was taken to Orly where the powerplant was removed for testing within a wind tunnel. The excellence in the design was confirmed. It was later destroyed in an Allied air raid.

          
Details
What's in the box:
Bloch MB.150 1:200 WSF
Dimensions:
5.3 x 4.6 x 1.44 cm
Switch to inches
2.09 x 1.81 x 0.57 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.