Click and drag to rotate
Grasshopper & CW01 Chassis' Diff Lock 3d printed WSF Polished. In a completed diff gear.

DIGITAL PREVIEW
Not a Photo

WSF Polished. In a completed diff gear.
Grasshopper & CW01 Chassis' Diff Lock 3d printed WSF Polished. In a completed diff gear.
Grasshopper & CW01 Chassis' Diff Lock 3d printed WSF Polished. In a completed diff gear.

DIGITAL PREVIEW
Not a Photo

Grasshopper & CW01 Chassis' Diff Lock 3d printed
Grasshopper & CW01 Chassis' Diff Lock 3d printed

DIGITAL PREVIEW
Not a Photo

Grasshopper & CW01 Chassis' Diff Lock

Print With Shapeways
Choose Your Material
$21.60
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
This is a diff lock for the vintage/old school Grasshopper and CW01 Tamiya chassis'. These include the popular Tamiya models: The Hornet, Lunchbox and Midnight Pumpkin.

When fitted properly it will lock the differential, providing equal power to both wheels (which is often preferred in off-road environments) and may also eliminate the side-to-side slop, which is common to this gearbox, without impeding rotation. It is designed to be fitted using the internal diff pins but is tight enough to be fitted without them. It has also been designed to be a tight fit for the axle shafts with hex ends so you may need to use a bit of force to press fit the shafts into the diff lock. Please be careful not to use anything sharp and/or pointed, or a hammer, as you might damage the axle shafts and/or the diff lock. The hex end of the shaft will need to be properly aligned in order to fit.

This diff lock design has been test fitted on a new Hornet gearbox with a new set of gears and sealed metal bearings. Used gears, bearings and gearbox casings may cause variations in fitment. Also, please be aware that the 3D printing process may also cause minute variations in fitment. Light sanding in key areas may be necessary.
Details
What's in the box:
Grasshopper Project - Diff Lock V2.1
Dimensions:
3.38 x 3.38 x 3.75 cm
Switch to inches
1.33 x 1.33 x 1.48 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.