Click and drag to rotate
HO/1:87 High Mast Light kit 3d printed [en]painted&assembled [de] bemalt & montiert

DIGITAL PREVIEW
Not a Photo

[en]painted&assembled [de] bemalt & montiert
HO/1:87 High Mast Light kit 3d printed [en]painted&assembled [de] bemalt & montiert
HO/1:87 High Mast Light kit 3d printed [en]painted&assembled [de] bemalt & montiert

DIGITAL PREVIEW
Not a Photo

HO/1:87 High Mast Light kit 3d printed
HO/1:87 High Mast Light kit 3d printed

DIGITAL PREVIEW
Not a Photo

HO/1:87 High Mast Light kit

Print With Shapeways
Choose Your Material
$17.34
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
[EN] High mast with flood lights - kit
Model has been optimised for the new pricing scheme at Shapeways (reduced 10% in price)

This is a model of a 20 meter (~23 cm in HO) high mast with 8 flood lights, often found in industrial yards, ports, traffic round abouts etc.
It comes with 4 'guardrails' around the base of the mast (these can be purchased separately as well).

This kit consists of 1 high mast lights, consisting of 6 parts.

The frame with the 8 flood lights, should be attached to the top of the high mast, or can be lowered,
just above the manhole. You need to provide thin/straight rope/wire in both cases.

In case you want to depict the flood light frame to be lowered (for maintenance), unless your rope is very straight by itself, you might want to attach a metal M6 washer to the bottom of the frame with the lights, as to give it some weight, that will pull the ropes straight.

If the masts are warped, soak them in hot water (more then luke warm, but not boiling, suggested 70-80 degrees Celcius) for about 30 seconds, then let them cool down while straightening them up along a straight square tube or similar.

[DE] Hochmast mit Flutlichter - Bausatz
Modell wurde optimiert für Shapeways neues Preisschema (10% reduziert im Preis)
Dies ist ein Modell eines 20 Meter hohen Hochmast mit 8 Flutlichtern, wie man Sie oft in Industrieanlagen, Häfen, Kreisverkehr usw. findet.
Es kommt mit 4 'Leitplanken' rundum der Basis des Mastes (diese können auch separat gekauft werden).

Dieser Satz besteht aus 1 Hochmasten, der aus 6 Teilen besteht.

Der Rahmen mit den 8 Flutlichtern sollte an der Oberseite des hohen Mastes angebracht werden oder kann abgesenkt werden, direkt über dem Mannloch. Sie müssen in beiden Fällen dünn / gerade Seil / Draht liefern.

Falls Sie die Flutlichtern abgesenkt darstellen möchten (für Wartungszwecken), es sei denn, Ihr Seil ist sehr gerade von sich selbst, Können Sie eine Metall - M6 - Unterlegscheibe anbringen an der Unterseite des Rahmens mit den Lichtern, um ihm etwas Gewicht zu geben, das die Seile gerade zieht.

Wenn die Masten verzogen sind, tauchen Sie sie ein in heißes Wasser (mehr als lauwarm, aber nicht kochend, vorgeschlagenen 70-80 Grad Celsius) für etwa 30 Sekunden, dann lassen Sie sie abkühlen,  entlang ein geraden Vierkantrohr oder ähnlich.

(v4) [#06080101]
www.robs-mw.com / facebook / flickr
Details
What's in the box:
HO/1:87 High Mast Light kit
Dimensions:
3.39 x 16.31 x 0.91 cm
Switch to inches
1.34 x 6.42 x 0.36 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.