Clear Ultra Fine Detail Plastic
YT1300 FFG 1/270 SET ALL UPGRADES
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$23.68
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Combo of all my upgrades for the 1/270 FFG Falcon
If you have a 1/270 FFG Falcon and you want to accurize it you will need this upgrade.
This bundle of parts includes totally screen accurate upgrades, that will improve your FFG 1/270 Falcon.
In this bundle you will find 1 -one- radar with arms, 1 -one- cabin cone, one -1- cockpit -with 4 seats, floor, and consoles-, and one -1- cabin backwall -that you can lighten with a back led.
All these upgrades have the right dimensions to fit the 1/270 FFG Falcon.
To install the cabin cone, backwall and cockpit you will have to cut the stock cone, make some room for the cockpit in the cabin tube -sanding and cutting- and glue in place my upgrades.
The radar dish included has built in mount arms. So you can install it just in the same place than the stock dish. Just remove the stock dish, pulling gently the mount hull arms to extract the stock dish. After that, you can install my accurized dish, inserting it in the same stock mount.
ATTENTION: Take care as these upgrades are very fragile.
This upgrade is available in FXD.
If you have a 1/270 FFG Falcon and you want to accurize it you will need this upgrade.
This bundle of parts includes totally screen accurate upgrades, that will improve your FFG 1/270 Falcon.
In this bundle you will find 1 -one- radar with arms, 1 -one- cabin cone, one -1- cockpit -with 4 seats, floor, and consoles-, and one -1- cabin backwall -that you can lighten with a back led.
All these upgrades have the right dimensions to fit the 1/270 FFG Falcon.
To install the cabin cone, backwall and cockpit you will have to cut the stock cone, make some room for the cockpit in the cabin tube -sanding and cutting- and glue in place my upgrades.
The radar dish included has built in mount arms. So you can install it just in the same place than the stock dish. Just remove the stock dish, pulling gently the mount hull arms to extract the stock dish. After that, you can install my accurized dish, inserting it in the same stock mount.
ATTENTION: Take care as these upgrades are very fragile.
This upgrade is available in FXD.
Details
What's in the box:
YT1300 FFG 1 270 COCKPIT W BACKWALL NF
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$53.75
$65.79
