Point counter/mini base - 49mm (rotating)

Rotating Life Point Counter/Removable miniature base for Descent 2nd Edition boardgame (or anything else you fancy).
Features :

• Recess on top to snap on/off a miniature (with a 49mm base) or a round token (49mm diameter). Fins ensure the mini or token stays in place during gameplay.
• "18-click" function, cover a range of 18 numbers.
• Takes minimal space on the board !
• Link to video.

Two set "sizes" :
- Medium : One point counter (2 parts)
- Large : Two points counters (4 parts). Cheaper per part...
Select the desired size in the top-right menu.

Parts attached with a link. Assembly is required (print the numbers on regular paper, then assemble the numbers and the two 3D-printed parts).

Step-by-step assembly instructions and numbers template can be found there. Check the step-by step! This is easy, but if you don't think you'll be able to do it, please don't buy this model!!

Assembled counter is about 17mm high, 52mm diameter.

The model comes unpainted, it has a single colour.
If you want to paint it, the process is almost identical to any regular plastic miniature. Some recommendations:
- With White Plastic : Wash the model, to remove any remaining nylon powder. Use soapy water, rub with toothbrush, rinse, let dry. Spray prime (you can apply more primer coats than usual, though), paint, spray varnish.

Check the Descent section of my shop for other related models.