NMods alfa body

This is my first prototype squonker mod. Alfa was designed to utilize a single 18650 OR 20700 battery and a maximum 50mm tall bottle. The magnet slots are 1 by 9mm with 0,2mm extra. I plan to use 3x 1mm wide 3mm long magnet rods. The 510 thread windth is 11mm, with a 2mm deep 22mm wide slot for the platform. The firing switch hole was designed to use the Mitec styled 12mm switch and has a 16mm wide 1mm deep slot for aesthetic purpose. The insides are 45x70x22mm, perfect for a tight mosfet build. Battery contacts can be made from copper strips available in electronics/hardware stores.

Parts checklist:

Printed parts:

-Nmods alfa body: http://shpws.me/OaQA
-NMods alfa logoed door: http://shpws.me/OaQM  OR  NMods alfa logoless door: http://shpws.me/OaQI

Hardware:

- Bottom feeding 510 connector with a maximum 11mm thread diameter and maximum 22mm diameter catch cup
-Mitec style pushbutton with 12mm thread diameter and maximum 16mm platform diameter
-Magnets for the door can be either 4 pieces of 1x9mm or 12 pieces of 1x3mm rods.