Hand-painted White plastic
Space portals Full (2-4-6 pcs) - Fleet Commander
Made by
Print With Shapeways
Choose Your Size
Choose Your Material
Choose your color and finish
Choose Your Size
$12.47
Choose Your Material
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Miniature space portals for Fleet Commander boardgame (or anything else you fancy).
"Full" Variant with a wavy disc in the middle.
Dimensions are about 32mm outer diameter, 20mm length.
They have a 3mm diameter (0.12") hole under to fit on a flight stand (Litko, stuff4games, or equivalent).
Three set "sizes" :
- Small : Two portals (2 pcs)
- Medium : Four portals (4 pcs)
- Large : Six portals (6 pcs)
Select the desired size in the top-right menu.
Parts are attached with a sprue*.
Check the Fleet Commander and High Frontier sections of my shop for more S-F stuff.
The model comes unpainted. It has a single colour.
If you want to paint it, the process is almost identical to any regular plastic miniature. Some recommendations:
- With White Plastic : Wash the model, to remove any remaining nylon powder. Use soapy water, rub with toothbrush, rinse, let dry. Spray prime (you can apply more primer coats than usual, though), paint, spray varnish.
- With Fine Detail Plastic only : Wash the model, to remove any remaining wax. Approx. 3 minutes in acetone, or approx. 30 minutes in denaturated alcohol, or approx. 30 minutes in Simple Green. Rub gently with a toothbrush, rinse with water, let dry. Spray prime, paint, spray varnish.
Note :
-Due to manufacturing tolerances, the 3mm hole might need some rework to fit nicely on the flight stand's peg.
-*When you cut the sprue on a coloured model (that is, all except White, Grey, and Fine Detail), a white dot will appear where you've cutted. Depending on the dye's colour, this white dot can be +/- visible. It can be easily corrected by using a permanent pen on the dots.
-The flight stands are not included.
"Full" Variant with a wavy disc in the middle.
Dimensions are about 32mm outer diameter, 20mm length.
They have a 3mm diameter (0.12") hole under to fit on a flight stand (Litko, stuff4games, or equivalent).
Three set "sizes" :
- Small : Two portals (2 pcs)
- Medium : Four portals (4 pcs)
- Large : Six portals (6 pcs)
Select the desired size in the top-right menu.
Parts are attached with a sprue*.
Check the Fleet Commander and High Frontier sections of my shop for more S-F stuff.
The model comes unpainted. It has a single colour.
If you want to paint it, the process is almost identical to any regular plastic miniature. Some recommendations:
- With White Plastic : Wash the model, to remove any remaining nylon powder. Use soapy water, rub with toothbrush, rinse, let dry. Spray prime (you can apply more primer coats than usual, though), paint, spray varnish.
- With Fine Detail Plastic only : Wash the model, to remove any remaining wax. Approx. 3 minutes in acetone, or approx. 30 minutes in denaturated alcohol, or approx. 30 minutes in Simple Green. Rub gently with a toothbrush, rinse with water, let dry. Spray prime, paint, spray varnish.
Note :
-Due to manufacturing tolerances, the 3mm hole might need some rework to fit nicely on the flight stand's peg.
-*When you cut the sprue on a coloured model (that is, all except White, Grey, and Fine Detail), a white dot will appear where you've cutted. Depending on the dye's colour, this white dot can be +/- visible. It can be easily corrected by using a permanent pen on the dots.
-The flight stands are not included.
Details
What's in the box:
Space portal Full (2pcs)
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$15.67
$15.67
$15.68
$15.68
