Click and drag to rotate
GWR American 8' Bogie with boss 3d printed

DIGITAL PREVIEW
Not a Photo

White Natural Versatile Plastic
GWR American 8' Bogie  with boss 3d printed
GWR American 8' Bogie  with boss 3d printed

DIGITAL PREVIEW
Not a Photo

GWR American 8' Bogie with boss

Print With Shapeways
Choose Your Material
$7.45
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
GW 8' American Bogie with central boss

00 Gauge, 1:76, 4mm/Foot

This type of bogie was used by the GWR on various coaches from the Churchward era. I developed this print as a replacement for some white metal versions fitted to a Toplight  slip coach of unknown origen that I had obtained from eBay, but could be used on other coaches.

This print has been designed to use HORNBY R8263 14.1mm or Bachmann 36-033 14mm Coach Disc Wheels and has NEM pockets*. 

On some prints I have found that the NEM socket is a very tight fit so I would recommend that these are cleaned out with a fine sharp object (pin) to ensure there is no dust from the manufacturing process.  In addition, you may need to flex the sides a little when fitting the wheels to ensure smooth running. This is particularly true for Bachmann wheels.

 

* This product was designed for use with the Hornby R8268 and R8276, large and medium width couplings and will also work with the R8219 Hornby NEM coupling.  However it will not work with the R8220 Hornby NEM pocket close. This has not been tested using Kadee or any other type of coupling.

 

WHAT'S IN THE BOX

1 Bogie frame print. These are sold singly to allow customers to by an individual bogie should they require replacements.
Details
What's in the box:
bogie-american_8_with_boss
Dimensions:
5.73 x 3.2 x 1.13 cm
Switch to inches
2.25 x 1.26 x 0.44 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.