The Destroyer Chassis Chamber
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$129.80
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
crystal chamber for The Destroyer Chassis
--------Crystal chamber specification:--------
Crystal chamber is made from three parts, 2x LED holders, and chamber body
** this product complete the Destroyer chassis **
* printing in metal can have ± 0.125mm change in size
** Chassis have a small place for resistors, a professional installer is recommended
*** some minor modification may be needed (printing can shrink the rods holes by 0.1mm or less)
--------Crystal chamber specification:--------
Crystal chamber is made from three parts, 2x LED holders, and chamber body
** this product complete the Destroyer chassis **
- crystal chamber has a built holes for two 5mm LED to light the crystal.
- crystal chamber built for a 1.5" long and 0.42" thick crystal.
- 3D printed crystal is available in my store: The Destroyer crystal
- to hold the crystal chamber with the chassis you will need:
- six 2.8mm (0.114") solid brass rods, length will vary (depends on your built).
- three will go thru the crystal chamber and thru most of the chassis
- three will go thru the crystal chamber and a small part of the chassis. link: solid rods
- 3mm led holders are available for eight 3mm led's (you will need to buy x4 each holder holds two LED)
* printing in metal can have ± 0.125mm change in size
** Chassis have a small place for resistors, a professional installer is recommended
*** some minor modification may be needed (printing can shrink the rods holes by 0.1mm or less)
Details
What's in the box:
The Destroyer Chassis Chamber
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$39.91
$10.70
$5.50
$7.66
