2.2-inch Monster Jam Style Wheel

THis is are our 2.2-inch Monster Jam style wheel and it's designed to fit any solid axle monster truck with a 12mm hex. The price shown is for a single wheel and four are required to complete a truck. We designed it to accept wheel adapters from Vanquich Products and several offsets are available. Click on the link below to get to their page. Please note, these are 3D printed and are not as strong as a wheel that has been injection molded. They held up well to testing on the race track but they may not hold up to the abuse of freestyle. They require you to purchase our 2.2-inch Wheel Caps (the link is also below) and hubs to complete it. Four are required for each vehicle. When installing the 2mm screws that hold the cap in place, make sure you apply pressure to the screw while installing the first time to help the threads cut into the plastic instead of stripping the hole. Paint is required to bring this rim to life.

Painting Tips
We don't recommend using spray paint because it will quickly load up around the details and possibly fill them in. We recommend using enamel paint out of a jar that has been thinned slightly and a small paint brush. Small details such as the bolts on the face of the rim can be "painted" with a black marker. 

http://www.vanquishproducts.com/slw-hubs-axial/
http://www.vanquishproducts.com/black-slw-hubs-axial-1/

https://www.shapeways.com/product/23ERCUUBP/2-2-inch-wheel-cap?optionId=63534750