Smooth Fine Detail Plastic
DeAgo Falcon Corridor Ring
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$9.55
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is an upgrade part for the DeAgostini Millennium Falcon. These replace the bulkhead rings found in the side corridors. They are sized to fit the Frosted Extreme Detail printer. If you were to replace all of the rings in the model you would need seven total. This model is also offered in a 3-pack.
For my compatibility with my other corridor mods, clip off the round cylinder at the top and you will need the following quantities.
These rings protrude into the hall a little more to better match the proportions of the filming set.
You also get the added detail of the hose which is missing from the stock model pieces.
For my compatibility with my other corridor mods, clip off the round cylinder at the top and you will need the following quantities.
- Straight Corridor = 4 rings
- Straignt Corridor Extended = 6 rings
- Starboard Corridor = 2 rings
- Port Corridor = 3 rings
These rings protrude into the hall a little more to better match the proportions of the filming set.
You also get the added detail of the hose which is missing from the stock model pieces.
Details
What's in the box:
corridor_ring_01
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
