Click and drag to rotate
Bodenmühle VER 2 - Antrieb 1:220 3d printed bemalt und dekoriert - painted and decorated

DIGITAL PREVIEW
Not a Photo

bemalt und dekoriert - painted and decorated
Bodenmühle VER 2 - Antrieb 1:220 3d printed bemalt und dekoriert - painted and decorated
Bodenmühle VER 2 - Antrieb 1:220 3d printed bemalt und dekoriert - painted and decorated

DIGITAL PREVIEW
Not a Photo

Bodenmühle VER 2 - Antrieb 1:220 3d printed
Bodenmühle VER 2 - Antrieb 1:220 3d printed

DIGITAL PREVIEW
Not a Photo

Bodenmühle VER 2 - Antrieb 1:220 3d printed
Bodenmühle VER 2 - Antrieb 1:220 3d printed

DIGITAL PREVIEW
Not a Photo

Bodenmühle VER 2 - Antrieb 1:220 3d printed
Bodenmühle VER 2 - Antrieb 1:220 3d printed

DIGITAL PREVIEW
Not a Photo

Bodenmühle VER 2 - Antrieb 1:220

Print With Shapeways
Choose Your Size
$21.17
Choose Your Material
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
DEUTSCH
Bausatz Bodenmühle mit Kasse Version 2 für 1:220  - unbemalt und ohne Deko
- gegen den Uhrzeigersinn drehend wie bei alten Versionen üblich.

- passend für Minimotoren mit Mikrogetriebe 
- Nicht geeignet für Motoren mit kurzen Wellen.
Beispiel - sol-expert-1.150 - 6V (bei manchen Modellen ist 12V besser) oder 1:298 wenn es langsamer sein soll
- Motor wird festgeschraubt (M1,6x3)
- Ich garantiere nicht, dass eine Verklebung des Motors funktioniert.
- 2 Mondgondeln separat
- Es könnte sein, dass die Löcher für den Motor geweitet werden müssen. Ich mache das mit einem 4mm Bohrer per Hand und mit einer Pinzette
- Fallermotor 180629 - 4 U/min kann verbaut werden (Loch muss geweitet werden)

ENGLISCH
Kit old groundmill with ticketbox version 2 for 1:220 - unpanited and without decals
- counterclockwise Version like they did in the old days

- fits the minimotor with microdrive 
- not suitable for motors with short shaft.
example - sol-expert-1.150 - 6V (sometimes it is better to use a 12V) oder a bit slower 1.298
- motor has to be screwed on (M1,6x3)
- I do not guarantee that an adhesive bond works.
- 2 separate moongondulas
- It could be that the holes, where the motor is mounted on are not wide enough. For the center i use a 4 mm drill per hand and an old tweezer for the others.
- Fallermotor 180629 - 4 U/Min can be used (hole has to be expanded)

Spiegel für die Dachkante - decoration for the edge of the roof (Z scale)
click

MOTOR UND SCHRAUBEN NICHT ENTHALTEN - MOTOR AND SCREWS ARE NOT INCLUDED
Irrtum vorgehalten - errors expected

ACHTUNG.
Die Designs in diesem Shop sind zum Zweck des Modellbaues oder sammelns bestimmt. Sie können verschluckbare Kleinteile enthalten die für Kleinkinder  0-3 JAhre ein Erstickungsrisiko darstellen können oder müssen mit einem Messer auseinandergeschnitten werden. Es ist kein Spielzeug! Sie sollten grundsätzlich nur von Personen über 14 Jahren oder unter Aufsicht eines Erwachsenen verwendet werden.
ATTENTION.
The designs in this shop are designed for modeling purposes or collecting only. It is not a toy. They may contain small parts which can be swallowed which can be a chocking hazzard for children 0-3 years or have to be seperated with a knife.
They should only be used by persons over 14 years of age or under supervision of an adult.
Details
What's in the box:
Horsecarousel Z
Dimensions:
4.4 x 4.22 x 6.87 cm
Switch to inches
1.73 x 1.66 x 2.71 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.