You must be logged in and verified to contact the designer.
Product Description
These are the rudder blades for the German Kriegsmarine Aircraft Carrier Graf Zeppelin in 1:100 scale. I designed the hole for the axis of 25 mm deep and 5 mm in diameter. The rudder can be fixed by stud acrews, for which I left some holes in the blade itself. The set consist of the left and right rudder – difference is only the side where the stud screw holes are placed – thus studs cannot be seen from the outside view.Each rudder is 50 high and 8 mm thick at the thickest sections. Both are based on the plans by Hans Gally.
In case you need different material, such as brass or steel – let me know.
Ruderblätter für Flugzeugträger Graf Zeppelin in 1:100. Die Blätter haben eine runde Öffnung für das Rudergestänge von 25 mm x 5 mm und können mit 2 Madenschrauben am Ruderblatt fixiert werden. Das Gewinde dafür muss noch geschnitten werden. Das Teil besteht aus den Ruderblättern für Backbord und Steuerbord. Sie unterscheideden sich nur dadurch, das die Öffnungen für die Madenschrauben seitenverkehrt sind, so das die Schrauben von der Außenseite erreichbar sind. Die Ruderblätter sind 50 mm hoch und an der dicksten Stelle 8 mm dick. Andere Materialien wie Messing oder Stahl auf Anfrage.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: