Chassis & Interior Fly Ferrari 250LM inline pod
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$24.94
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/32 Chassis & Interior for Fly Ferrari 250LM
See build notes below.
Limited lifetime guarantee - if it breaks, CG Slotcars will replace it!!!
Build Notes
Contact us with any questions!
See build notes below.
Limited lifetime guarantee - if it breaks, CG Slotcars will replace it!!!
- Light weight and strong
- Lower Center of Gravity than Stock Chassis
- Accepts Slot.it 4 post style inline pod
- Accepts 2mm axle height adjusters screws on front axle
- Accepts sphericle axle bushings for front axle (optional)
- ribbing to control chassis flex
- Strengthened body mount pads
- posts for centering front axle with stopper
Build Notes
- Carefully clip interior free from 3DP chassis
- You will need to carefully remove stock interior leaving the posts intact. Best method is putting a flat blade screwdriver under each post and slowly turning driver (not lifting!). Interior is meant to use Fly stock helmet (Helmet not provided).
- The front grill piece should be mounted on the chassis via the front screws - this may or may not be glued into the body shell. You may need to remove 1-2mm from each inside edge around the guide mount of the grill piece to get the guide to turn freely (maybe).
Contact us with any questions!
Details
What's in the box:
Chassis & Int. for Fly Ferrari 250LM
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
