You must be logged in and verified to contact the designer.
Product Description
This signal mechanism is for the BRASS NSWR Lower Quadrant three signal arm Timber Post signals.
There is a jig on the top of the base to assist in bending up two of the three operating rods that go from the counterweight lever to the signal arms of the bracket signal (the third operating arm is too long for the base).
The brass signal post plugs into this White Strong and Flexible base mechanism and should be glued in place with Super Glue (ACC).
Also required to make the mechanism operate are:
1 x #4 6mm screw
1 x 3mm I.D. washer
2 x 2-56 12mm screws (either Kadee #1709 1/2" stainless screws- preferred or #256 1/2" nylon plastic screws - come in KD5 coupler packets).
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: