Click and drag to rotate
1/350 RN Battleship 50ft Lower Boat Booms x4 3d printed 3d render showing set

DIGITAL PREVIEW
Not a Photo

3d render showing set
1/350 RN Battleship 50ft Lower Boat Booms x4 3d printed 3d render showing set
1/350 RN Battleship 50ft Lower Boat Booms x4 3d printed 3d render showing set

DIGITAL PREVIEW
Not a Photo

1/350 RN Battleship 50ft Lower Boat Booms x4 3d printed 3d render showing product detail
1/350 RN Battleship 50ft Lower Boat Booms x4 3d printed 3d render showing product detail

DIGITAL PREVIEW
Not a Photo

1/350 RN Battleship 50ft Lower Boat Booms x4 3d printed 3d render showing product detail
1/350 RN Battleship 50ft Lower Boat Booms x4 3d printed 3d render showing product detail

DIGITAL PREVIEW
Not a Photo

1/350 RN Battleship 50ft Lower Boat Booms x4 3d printed 3d render showing product detail
1/350 RN Battleship 50ft Lower Boat Booms x4 3d printed 3d render showing product detail

DIGITAL PREVIEW
Not a Photo

1/350 RN Battleship 50ft Lower Boat Booms x4 3d printed 3d render showing product detail
1/350 RN Battleship 50ft Lower Boat Booms x4 3d printed 3d render showing product detail

DIGITAL PREVIEW
Not a Photo

1/350 RN Battleship 50ft Lower Boat Booms x4 3d printed
1/350 RN Battleship 50ft Lower Boat Booms x4 3d printed

DIGITAL PREVIEW
Not a Photo

1/350 RN Battleship 50ft Lower Boat Booms x4

Made by
Print With Shapeways
Choose Your Material
$18.72
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
1/350 Scale Royal Navy Battleship 50ft Lower Boat Booms. Set contains 4 booms: 2 in out position, 1 in stored position (Port) and 1 in stored position (Starboard). See My Shop for 40ft and 20ft lengths for Cruisers and Destroyers, available in larger scales (not below 1/350 due to printed limitations).
  • Accurately created using the plans in Norman Oughs model book
  • Each boom has Spider Bands, Grommits and the Fastening Bracket.

Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain.  It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners.  Customers report that "Bestine" and "Goo Gone" also work well.During the printing process, liquid resin is cured by ultraviolet light.  Microscopic bits of resin may remain uncured.  
Let your parts sit in direct sunlight for a few hours to fully cure the resin.  

Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.    
Details
What's in the box:
350 Battleship Lower Boom
Dimensions:
1.38 x 4.77 x 0.21 cm
Switch to inches
0.54 x 1.88 x 0.08 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.