Click and drag to rotate
Matterhorn, Switzerland/Italy, 1:50000 3d printed

DIGITAL PREVIEW
Not a Photo

Matterhorn, Switzerland/Italy, 1:50000 3d printed
Matterhorn, Switzerland/Italy, 1:50000 3d printed

DIGITAL PREVIEW
Not a Photo

Matterhorn, Switzerland/Italy, 1:50000 3d printed
Matterhorn, Switzerland/Italy, 1:50000 3d printed

DIGITAL PREVIEW
Not a Photo

Matterhorn, Switzerland/Italy, 1:50000 3d printed
Matterhorn, Switzerland/Italy, 1:50000 3d printed

DIGITAL PREVIEW
Not a Photo

Matterhorn, Switzerland/Italy, 1:50000 3d printed
Matterhorn, Switzerland/Italy, 1:50000 3d printed

DIGITAL PREVIEW
Not a Photo

Matterhorn, Switzerland/Italy, 1:50000 3d printed
Matterhorn, Switzerland/Italy, 1:50000 3d printed

DIGITAL PREVIEW
Not a Photo

Matterhorn, Switzerland/Italy, 1:50000 3d printed
Matterhorn, Switzerland/Italy, 1:50000 3d printed

DIGITAL PREVIEW
Not a Photo

Matterhorn, Switzerland/Italy, 1:50000 3d printed
Matterhorn, Switzerland/Italy, 1:50000 3d printed

DIGITAL PREVIEW
Not a Photo

Matterhorn, Switzerland/Italy, 1:50000 3d printed
Matterhorn, Switzerland/Italy, 1:50000 3d printed

DIGITAL PREVIEW
Not a Photo

Matterhorn, Switzerland/Italy, 1:50000 3d printed
Matterhorn, Switzerland/Italy, 1:50000 3d printed

DIGITAL PREVIEW
Not a Photo

Matterhorn, Switzerland/Italy, 1:50000 3d printed
Matterhorn, Switzerland/Italy, 1:50000 3d printed

DIGITAL PREVIEW
Not a Photo

Matterhorn, Switzerland/Italy, 1:50000

Made by
Print With Shapeways
Choose Your Material
$87.00
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
It's the Matterhorn. The quintessential pyramid peak in the poster-child country for alpine scenery. Assembled from a variety of data sources, this miniature uses the most accurate freely available data, and some even better data that isn't. Monte Cervino, as it's known in Italy, is the 12th highest peak in the Alps, and at 4478m, is a monster of a mountain, especially when seen from Zermatt or Breuil-Cervinia in the deep valleys below. The color image is from the ESA's Sentinel-2 satellite, and was taken May 27, 2017.

Model scale is 1:50000
Model measures 12 x 9 x 5.3 cm (4.7" x 3.5" x 2.1")
Original area is approximately 6 by 4.5 km
Altitudes covered: 2241m to 4478m
There is no vertical exaggeration applied to this model. This is a true-to-life scale model of a real place.

Click here for more sizes.
Click here for other 1:50000 models.

TinyMtn models are most affordable in the "Sandstone" and "White Natural Versatile Plastic" materials. This model is in "Sandstone," which is a glued gypsum material. When you receive the model it will be ready for display, though it may smell funny and need some time to air out. "Sandstone" models are much more brittle than "Versatile Plastic" models, but feel more like light stone. Do not soak it in water, though you can safely seal it with Polycrylic or a similar water-based clear spray sealant. Read more about this popular material here.

All TinyMtn models have hollow bottoms - this is to save on weight, and thus cost. Many larger models also have extra flanges on their undersides to increase rigidity and strength. To make the model more solid, you should feel free to carefully pour resin into the bottom cavity, or glue a properly-sized slab of wood or another material into it.

These models have been optimized for the above materials, and are not offered in other materials for strength or cost reasons. If you need one in another material, please tinymtnbiz@gmail.com and we'll do our best to fulfill your request.

(C) 2017 TinyMtn (TM)
Model created using GDAL, NetPBM, Gmsh, Carve, MeshLab, and other custom software
Contains modified Copernicus Sentinel data from 2016
Copernicus Open Access Hub is https://scihub.copernicus.eu/dhus
Data source: Swiss Federal Office of Topography
Request a custom order and get this product personalized just for you
Details
What's in the box:
Matterhorn, Switzerland/Italy, 1:50000
Dimensions:
12 x 8.99 x 5.26 cm
Switch to inches
4.72 x 3.54 x 2.07 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.