Click and drag to rotate
HO LQ Bracket or 2 Arm Signal Mech - Brass Post 3d printed

DIGITAL PREVIEW
Not a Photo

White Natural Versatile Plastic
HO LQ Bracket or 2 Arm Signal Mech - Brass Post 3d printed
HO LQ Bracket or 2 Arm Signal Mech - Brass Post 3d printed

DIGITAL PREVIEW
Not a Photo

HO LQ Bracket or 2 Arm Signal Mech - Brass Post

Made by
Print With Shapeways
Choose Your Material
$15.92
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
This signal mechanism is for the BRASS NSWR Lower Quadrant bracket or two signal arm Timber Post signals.

There is a jig on the top of the base to assist in bending up the two operating rods that go from the counterweight lever to the signal arms of the bracket signal.

There is no jig for the operating rods of a two arm signal post, these must be bent up by trial and error.

The brass signal post plugs into this White Strong and Flexible base mechanism and should be glued in place with Super Glue (ACC).

Also required to make the mechanism operate are:

1 x #4 6mm screw

1 x 3mm I.D. washer

2 x 2-56 12mm screws (either Kadee #1709 1/2" stainless screws- preferred or #256 1/2" nylon plastic screws - come in KD5 coupler packets).
Details
What's in the box:
HO LQ Signal Mechanism - Brass Post Double V3
Dimensions:
3 x 2.56 x 5.65 cm
Switch to inches
1.18 x 1.01 x 2.23 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.