This is
ONLY for the
Korbanth K4 lightsaber.
Any Quartz Crystal with a maximum diameter of 7mm (5mm recommended) and an aproximate length of 18mm will go. If you don't want to worry about fitting, cutting or sanding, there's one available here:
https://shpws.me/OmOM
It will hold any
Li-Ion 18650 Battery Cell, even the longest Panasonic NCR18650B, the
VECO 20mm 4Ω 3W Bass Speaker (sold at JQ Sabers, The Saber Armory, The Custom Saber Shop, etc), the
SaberForge style 2.1mm Recharge Port (sold at SaberForge, Slimsaber, etc) and the
Nano Biscotte V4.0/3.0 from Plecter Labs.
You will also need (as shown in the picture #3):
- 1x 5mm round LED
- 1x 5mm chromed LED holder (sold at eBay, Aliexpress, etc)
- 1x Crystal
Preparing the Crystal Chamber:
- 1) Cut the LED Holder threads to 4.5mm.
- 2) Glue the LED Holder to the Crystal Chamber.
- 3) Glue together the 5mm round LED and the Crystal.
- 4) Insert the LED + Crystal in the LED Holder and glue.
Passing the wires (2 X Speaker + 3 X Recharge Port) through the Crystal Chamber:
Nano Biscotte Sound Board 3D model by Plecter Labs.