Finished painted and detailed load
Unfinished Lumber Load, N Scale, Flat Car Load
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$32.18
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This product represents a typical load of 2x4s. Random lengths of lumber were commonly shipped in this way up through the 1960s with some shipments into the 1970s.
If you are modeling the 50s or earlier then you would want to rough frame the load with wood dividers down the middle.
If you are modeling latter periods then you would want to band the stacks. Wood divders would still be used. If fork lifts were likely then bottom pieces would be used to make room for the fork lift forks under the loads.
The largest stack in this set is a scale16' long. Stacks are scale 56" high.
If you are modeling the 50s or earlier then you would want to rough frame the load with wood dividers down the middle.
If you are modeling latter periods then you would want to band the stacks. Wood divders would still be used. If fork lifts were likely then bottom pieces would be used to make room for the fork lift forks under the loads.
The largest stack in this set is a scale16' long. Stacks are scale 56" high.
Details
What's in the box:
Unfinished Lumber Load N Scale 2x4
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
