Render of the 3D model
DeAgo Millennium Falcon Deeper hold part 3 of 3
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$18.36
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
DeAgo Millennium Falcon Deeper hold part 3 of 3: Screen accurate technical station back wall
If you want the most screen accurate Millennium Falcon cargo hold in the galaxy then this mod is meant for you. As you might have noticed the stock cargo hold has some errors. This mod pushes the technical station back wall 9.5 mm to the back and is meant to solve the following issues:
- There should be more space on the right side of the starboard wall (near the technical station). In the movie, there is a wall insert where you can see wires and cables and this is not existent in the stock starboard wall. If you decide to mod the starboard wall and add the insert, then it will be better visible and the space on that area would be screen accurate, just like in ESB.
- The wall behind the technical station is not straight like the stock wall, but should be bent in the middle, have the same angle as the frames on its right side and stay inline / flush with those frames. The technical station back wall - provided as part 3 of 3 and designed by Christopher MacBrian - has the same angle as my frame section and stays inline with it. Why should you use my frames section? If you decide to replace the door on the stock port wall that gives access to the circuitry bay with a movie accurate one (or use a custom port wall that has the screen accurate circuitry bay door), you will notice that the stock last frame is blocking the movie accurate replacement door. My frames and pipes section design is placed deeper in the hold in order to solve this problem and free that door.
What's in the package?
With part 3 of 3 you will receive a screen accurate technical station back wall that has the same angle as my frames section and stays flush with it. Credits for designing this screen accurate technical station back wall go to Christopher MacBrian who helped me make this mod possible! Please notice that this wall was designed specifically for this mod and has a width of 47.5 mm and won't fit the stock set up.
Assembly
The screen accurate technical station back wall should be glued onto the stock floor extension at the bottom and in between the starboard wall extension (left side) and modded wall (right side) both provided as part 2 of 3.
If you want the most screen accurate Millennium Falcon cargo hold in the galaxy then this mod is meant for you. As you might have noticed the stock cargo hold has some errors. This mod pushes the technical station back wall 9.5 mm to the back and is meant to solve the following issues:
- There should be more space on the right side of the starboard wall (near the technical station). In the movie, there is a wall insert where you can see wires and cables and this is not existent in the stock starboard wall. If you decide to mod the starboard wall and add the insert, then it will be better visible and the space on that area would be screen accurate, just like in ESB.
- The wall behind the technical station is not straight like the stock wall, but should be bent in the middle, have the same angle as the frames on its right side and stay inline / flush with those frames. The technical station back wall - provided as part 3 of 3 and designed by Christopher MacBrian - has the same angle as my frame section and stays inline with it. Why should you use my frames section? If you decide to replace the door on the stock port wall that gives access to the circuitry bay with a movie accurate one (or use a custom port wall that has the screen accurate circuitry bay door), you will notice that the stock last frame is blocking the movie accurate replacement door. My frames and pipes section design is placed deeper in the hold in order to solve this problem and free that door.
What's in the package?
With part 3 of 3 you will receive a screen accurate technical station back wall that has the same angle as my frames section and stays flush with it. Credits for designing this screen accurate technical station back wall go to Christopher MacBrian who helped me make this mod possible! Please notice that this wall was designed specifically for this mod and has a width of 47.5 mm and won't fit the stock set up.
Assembly
The screen accurate technical station back wall should be glued onto the stock floor extension at the bottom and in between the starboard wall extension (left side) and modded wall (right side) both provided as part 2 of 3.
Details
What's in the box:
DeAgo Millennium Falcon Deeper hold part 3 of 3
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
