Click and drag to rotate
1.9" RC Wheel (+3mm offset) 3d printed

DIGITAL PREVIEW
Not a Photo

1.9" RC Wheel (+3mm offset) 3d printed
1.9" RC Wheel (+3mm offset) 3d printed

DIGITAL PREVIEW
Not a Photo

1.9" RC Wheel (+3mm offset) 3d printed
1.9" RC Wheel (+3mm offset) 3d printed

DIGITAL PREVIEW
Not a Photo

1.9" RC Wheel (+3mm offset)

Made by
Print With Shapeways
Choose Your Material
$22.26
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description

This is a RC wheel I've designed for an old Land Cruiser 7 series but there are some other cars that use it. It is 1.9" standar size, but has a positive offset of 3mm to get narrower axle look. It uses standar 12mm hex.

This wheel has been tested with stock Axial SCX10 knuckles. If you use different knuckles be sure they have similar design as SCX10 ones, or due to possitive offset the wheel could hit them.

 

You will need six 1.6mm screws to get the final scale look (I use 1.6x8).

 

NOTE: It has no hub cap, but a good option to get a great scale look are some Junfac hubs: http://www.junfac.com/shop/index.php?main_page=product_info&products_id=492

NOTE2: The wheel you see in the photo is not exactly this one. This newer version has better look and 6 screws instead of five (for printing limitations).

Details
What's in the box:
Llanta
Dimensions:
2.6 x 5.38 x 5.38 cm
Switch to inches
1.02 x 2.12 x 2.12 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.