The Jackhammer - Fidget Spinner Clicker - EDC
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$38.81
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a "Clicking" Fidget Spinner. It comes with a bearing cap that interferes with some plastic that click. Very distracting and different than any other fidget.
Fidgeting can help with concentration, relieve anxiety, or just give you something to do. I am constantly playing with random objects with my hands when I am thinking and creating. Some are not so quiet and possibly disruptive to others(see video).
When I discovered these simple fidget tools - yes these are tools - I knew I had to make some.
You can print out this pdf at 100% or "Actual Size" to see if it fits in your hand and you like the size: http://www.idlehandsdev.com/fidgets/jackhammer/JackhammerSize.pdf
This is The Jackhammer.
Bearings and Bearing Caps must be ordered separately.
It takes skateboard bearings which can be found at any skate shop. You can also get bearings in the link listed below.
Bearings: http://www.ebay.com/itm/10-Bearing-608ZZ-8x22-mm-608Z-Metric-Ball-Bearings-VXB-/400073187613?hash=item5d2638611d:m:mgY3Tje8TUIMghpOEnOYl3A
Other shapes and styles available in my store.
Bearing caps available here: http://shpws.me/MKOI - However they are not needed for these larger bearings if you don't want them - personal preference.
*** Due to the nature of 3D printed parts in general, occasionally some parts may have quite a tight bearing fitment. I have only experienced this on very few instances, but it should be mentioned that occaionally a small amount of material may need to be removed to help insert the bearing. A vice works well to install when your fingers are not able to do so. ***
Fidgeting can help with concentration, relieve anxiety, or just give you something to do. I am constantly playing with random objects with my hands when I am thinking and creating. Some are not so quiet and possibly disruptive to others(see video).
When I discovered these simple fidget tools - yes these are tools - I knew I had to make some.
You can print out this pdf at 100% or "Actual Size" to see if it fits in your hand and you like the size: http://www.idlehandsdev.com/fidgets/jackhammer/JackhammerSize.pdf
This is The Jackhammer.
Bearings and Bearing Caps must be ordered separately.
It takes skateboard bearings which can be found at any skate shop. You can also get bearings in the link listed below.
Bearings: http://www.ebay.com/itm/10-Bearing-608ZZ-8x22-mm-608Z-Metric-Ball-Bearings-VXB-/400073187613?hash=item5d2638611d:m:mgY3Tje8TUIMghpOEnOYl3A
Other shapes and styles available in my store.
Bearing caps available here: http://shpws.me/MKOI - However they are not needed for these larger bearings if you don't want them - personal preference.
*** Due to the nature of 3D printed parts in general, occasionally some parts may have quite a tight bearing fitment. I have only experienced this on very few instances, but it should be mentioned that occaionally a small amount of material may need to be removed to help insert the bearing. A vice works well to install when your fingers are not able to do so. ***
Details
What's in the box:
Jackhammer
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
