Click and drag to rotate
MagnetKlemmeRingHaken 3d printed

DIGITAL PREVIEW
Not a Photo

MagnetKlemmeRingHaken 3d printed
MagnetKlemmeRingHaken 3d printed

DIGITAL PREVIEW
Not a Photo

MagnetKlemmeRingHaken 3d printed
MagnetKlemmeRingHaken 3d printed

DIGITAL PREVIEW
Not a Photo

MagnetKlemmeRingHaken 3d printed
MagnetKlemmeRingHaken 3d printed

DIGITAL PREVIEW
Not a Photo

MagnetKlemmeRingHaken 3d printed
MagnetKlemmeRingHaken 3d printed

DIGITAL PREVIEW
Not a Photo

MagnetKlemmeRingHaken 3d printed
MagnetKlemmeRingHaken 3d printed

DIGITAL PREVIEW
Not a Photo

MagnetKlemmeRingHaken 3d printed
MagnetKlemmeRingHaken 3d printed

DIGITAL PREVIEW
Not a Photo

MagnetKlemmeRingHaken

Made by
SpT
Print With Shapeways
Choose Your Material
$38.42
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Ein kleines Magnettool, das ihr als Klemme oder als Ring für einen Haken nutzen könnt

Es ist "beidseitig" nutzbar -  um eine Campinglampe daran aufzuhängen oder eure Handtücher zu trocknen. Schaut euch die Photos an ... es gibt noch viel mehr Nutzungngsmöglichkeiten

Ihr braucht nur 2 Magnete - Neodym 15 mm Durchmesser und 2,5 mm Höhe - die könnt ihr überall im Netz kaufen. Schaut euch zum Zusammenbau bitte das Bild an - aber achtet undedingt darauf, dass die beiden Magnete zusammenpassen !!

Bitte seid vorsichtig, wenn ihr zum ersten Mal versucht, die Teile zu drehen. Das Tool ist in "einem Stück" designt und gedruckt. Nach ein paar Drehungen funktionieren es einwandfrei.

-----

A small magnet tool that you can use as a clamp or as a ring for a hook.

It can be used "on both sides" - to hang a camping lamp on it or to dry your towels. Take a look at the photos ... there are many more ways to use them

You only need 2 magnets - neodymium 15 mm in diameter and 2.5 mm in height - that you can buy anywhere on the net. Please take a look at the picture to assemble it - but pay attention that the two magnets fit together !!

Please be careful when trying to rotate the parts for the first time. The tool is designed and printed in one piece. After a few twists it works fine.  
Details
What's in the box:
Magnetclamp V1
Dimensions:
10.04 x 5.53 x 2.7 cm
Switch to inches
3.95 x 2.18 x 1.06 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.