Click and drag to rotate
Martinsyde S.1 (Early Undercarriage) 3d printed Computer render of 1:144 Martinsyde S.1

DIGITAL PREVIEW
Not a Photo

Computer render of 1:144 Martinsyde S.1
Martinsyde S.1 (Early Undercarriage) 3d printed Computer render of 1:144 Martinsyde S.1
Martinsyde S.1 (Early Undercarriage) 3d printed Computer render of 1:144 Martinsyde S.1

DIGITAL PREVIEW
Not a Photo

Martinsyde S.1 (Early Undercarriage) 3d printed 1:288 Martinsyde S.1 print (1 of 2)
Martinsyde S.1 (Early Undercarriage) 3d printed 1:288 Martinsyde S.1 print (1 of 2)

DIGITAL PREVIEW
Not a Photo

Martinsyde S.1 (Early Undercarriage) 3d printed 1:144 Martinsyde S.1 print
Martinsyde S.1 (Early Undercarriage) 3d printed 1:144 Martinsyde S.1 print

DIGITAL PREVIEW
Not a Photo

Martinsyde S.1 (Early Undercarriage) 3d printed 1:288 Martinsyde S.1 print (1 of 2)
Martinsyde S.1 (Early Undercarriage) 3d printed 1:288 Martinsyde S.1 print (1 of 2)

DIGITAL PREVIEW
Not a Photo

Martinsyde S.1 (Early Undercarriage) 3d printed 1:144 Martinsyde S.1
Martinsyde S.1 (Early Undercarriage) 3d printed 1:144 Martinsyde S.1

DIGITAL PREVIEW
Not a Photo

Martinsyde S.1 (Early Undercarriage)

Print With Shapeways
Choose Your Size
$8.21
Choose Your Material
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
The Martinsyde Scout (Type S.1) was never built in large numbers, but it is important because it was one of the first armed tractors, with a Lewis gun fixed to the top wing firing forward and slightly upward to avoid the propeller. Starting in late 1914, S.1's were doled out in ones and twos to R.F.C. squadrons in France and they were flown by air combat pioneers like Louis Strange. They served both in France and the Middle East, finally being retired in the latter half of 1915.Two forms of undercarriage were common; the early form with four wheels (to prevent tip over on landing) and the later, more conventional vee undercarriage.

This product comes in 1:144 and 1:285/6mm/1:288 scales.  The 1:285 scale product contains two aeroplanes, each with a detachable, translucent propeller disk rather than propeller blades.  They are joined by disposable links to keep the price down, since single-part models are more affordable.  You can break the links with nail clippers, wire cutters, or similar.

EDIT:  Models at scales smaller than 1:144 may no longer be available.  Shapeways discontinued the material for which they were designed, and the newer materials require that each and every model be adjusted to thicken surfaces like wings.  If you are interested in a particular model in a small scale, please let me know and I will prioritize it higher in the queue.

Related Products:  S.1 with early undercarriage, S.1 with vee undercarriage, Inverted S.1 with Louis Strange 

For more details and gaming information, see https://linen.miraheze.org/wiki/Martinsyde_S.1.
Details
What's in the box:
1/144 Martinsyde S.1 (Early Undercarriage)
1:144 Martinsyde S.1
Dimensions:
5.89 x 4.67 x 2.02 cm
Switch to inches
2.32 x 1.84 x 0.79 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.