Click and drag to rotate
Lynx Cartridge | BitJag Edition 3d printed

DIGITAL PREVIEW
Not a Photo

Lynx Cartridge | BitJag Edition 3d printed
Lynx Cartridge | BitJag Edition 3d printed

DIGITAL PREVIEW
Not a Photo

Lynx Cartridge | BitJag Edition 3d printed
Lynx Cartridge | BitJag Edition 3d printed

DIGITAL PREVIEW
Not a Photo

Lynx Cartridge | BitJag Edition 3d printed
Lynx Cartridge | BitJag Edition 3d printed

DIGITAL PREVIEW
Not a Photo

Lynx Cartridge | BitJag Edition 3d printed
Lynx Cartridge | BitJag Edition 3d printed

DIGITAL PREVIEW
Not a Photo

Lynx Cartridge | BitJag Edition 3d printed
Lynx Cartridge | BitJag Edition 3d printed

DIGITAL PREVIEW
Not a Photo

Lynx Cartridge | BitJag Edition

Made by
Print With Shapeways
Choose Your Material
$11.29
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description

Reproduction of the Atari Lynx Official Cartridge with small adjustments to accommodate 3D printing requirements, and the use of a different model of integrated circuit.  Details Below:

 

*Accommodating 3D printing requirements*
This version of the cartridge has and extra 0.2mm added to both the left and right side of the cartridge.  This was to meet the minimum requirement for "Wall Thickness" to ensure that the print would not be vulnerable to breaking.  This has been tested with a working circuit board (California Games).  It fits perfectly into the console, and plays the game normally.

 

*Accommodating New integrated Circuit model*
The depression beneath were the circuit board sits has been dropped an additional 0.6mm to accommodate the additional height of the SST39SF0(10/20/40) TSOP package (8mm x 14mm & 1.20mm high).  (Data sheet: HERE) NOTE: This has not yet been tested with the actual intergrated circuit.


*Other Notes*
-Plastic isn't quite as dense as and original Lynx Cartridge, but is still quite tough.  
-I have inserted, removed, and reinserted ~500 times to test wear on the plastic.  Seems resilient and only polishes the the surface where there is pressure and friction when inserting.
-The black hard plastic is currently not available as a polished material.  As a result the surface shows scratches very easily.  The material is still resilient, but just doesn't look as nice as the other colors.
-Plastic is not brittle, so, even though the 3D printed cartridge bends and flexes more than an original Lynx cartridge, it is still resilient.
-The original production circuit board for "California Games" fits perfectly.  When attached to the cartridge with masking tape, and then inserted into a Lynx console, the game plays normally.
-Currently there is no circuit board design that includes the new integrated circuit indicated above.
-Thin/small wall edges are not as sharp as the original cartridge, but still usable and will hold the circuit board and label effectively.

Details
What's in the box:
Lynx Cartridge | BitJag Edition
Dimensions:
5.73 x 0.7 x 6 cm
Switch to inches
2.26 x 0.28 x 2.36 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.