Translucent acrylic peg adaptors to assist with positioning a ring magnet to a flight peg as part of a gimbal mount for escort/fighters (or bombers with a narrow fuselage). The magnet locator is glued into the top of a fighter flight peg and the magnet (the typical size being 1/4" x 1/8" x 1/8"), and thus it ensures the magnet will be central and secure. For mine, I have used a small drop of two-part epoxy adhesive with excellent results. Each locator has a very small hole through the middle to assist with the escape of any trapped glue, should too much be applied.
Supplied on a sprue of fifteen. Also available as a sprue of five (http://shpws.me/JZql).
The top of the magnet locator is designed for ring magnets with an internal diameter of 1/8" (3.175mm) so would work with magnets of different external sizes as long as the internal diameter is correct.