This is for a Trimble TSC2 data collector using a Parani Bluetooth adapter SD1000. This is the short one for using without any cards in the back of the controller. The tall hat can be seen here https://shpws.me/HtYZ It is printed with sealing lid. It is designed to use the central screw and o-ring from your existing Trimble short cover and 2 O-Rings that you will have to source.
1.78 mm cross section x 5.28mm I.D. for the base of the Bluetooth antenna and a
91.0 mm I.D. x 3.5 mm cross section one for the cap to the TSC2, The screws that I use are pan head phillips sheet metal screws 8x3/4
They can be dyed as they are printed, however, these are printed with a laser sintered plastic and should be sealed after dying for best longevity. They should also be sealed prior to painting. Basically they are porous by nature. I use Future floor shine by Pledge, however, any sealer for plastic will work. If you order a colored print it will be dyed, that is just the way they are
For my surveying models click here.